Cooling System Tester

Why I did this?

          The Titian I had developed a water problem. After a run, I would find many cup fulls of water inside. Well everyone including myself thought the water was coming up though the driveshaft. Well that wasn't the case. I tested the hull in the bathtub. No leaks. Checked the water lines, they looked fine. Everything else also looked fine. So I thought during the run the pressure must have been causing a leak somewhere. I bought a $3 adapter that's normally used to attach a garden hose to a household faucet. I epoxied a piece of fuel tubing into it. Then attach the tubing to the water system on the hull. Pretty simple. Once I turned on the water and was able to watch the water flowing threw the system, I was able to find the razor type cut that was causing my headaches. I now do the dunk test and the water system test at high pressure to foresee any water leaks before hitting the pond.