Kyosho Jet Stream 800 Electric
Pictures & Information provided by Dong Garcia

          The good thing about this hull is it's hull strength. The hull is 31.5" long and made of ABS plastic. Its very thick ABS for an electric powered boat. So thick that installing a nitro engine on its even a possibility.

          The kit comes with a single motor reduction gear assembly, which is very tough! I like it! A modified motor down to 13turns will do good. The gear unit also has the capability to run twin 05 motors. You can see this is one on the pictures.

          The bad thing is it's weight. Considering that this is an electric powered boat, weight is all that matters to gain speed and agility.

          Another thing that took my time perfecting was the drive train & out drive unit. It requires plenty of attention to center and align the universal joint relative to the hinge-point of the rudder. Take good notice of this! The goal is to minimize friction when the rudder is in full steer to either left or right. This will maximize running time and cornering speed.
 

Suggested Modifications

          Replace the bushings on the shafts that rotates the prop! This will
maximize efficiency for longer running time.
 

Background on Dong Garcia.
He is a 28 year old video editor from Quezon City, Manila, Philippines.
Born there and proud to be a Filipino.

          He has been in the hobby for 7 years,  started out with electric cars
and hardly touched a nitro car...

          He runs his boats in a nearby pond. Well, not exactly a pond, but a building foundation that has been abandoned, and water filled up the 36foot excavation in the recent years that it has been left useless.

OffshoreElectrics.com thanks Dong for Pictures & Info!