Traxxas Spartan 36mm Motor.
This Aluminum water jacket is longer than the stock silicon jacket and uses larger inside passage ways for added water volume circulating around the motor. Which translates into better cooling. Both the water inlet and outlet are positioned at a 90 degree angle and pointed in opposite directions for optimal fit in the Traxxas Spartan.
As of 7/11/2011 these include adjustable directional water fittings.
Measures 2.44"(62mm) long and 1.55"(39.3mm) Outside diameter.
Note: Fits both 1st and 2nd Generation Traxxas Spartan Motors, Also 3674 Leopard Motors.
For the 1st Gen Motor you will need a 1.5mm Allen Driver to remove the stock rear screws on the motor.
Not logged in
Help & FAQ
© Copyright 2016 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.