Adjustable water cooled motor mount for 28mm, 36mm, 380, 500, 540 sized motors with adjustable motor hole spacing from 19mm to 25mm.
Angle is adjustable to allow straight alignment with propeller cable.
The anodized aluminum mounting plate is water cooled for added insurance against over heating. This can come in handy with both inrunner and outrunner style brushless motors. Its especially useful in outrunner motors, that do not have water cooling fitted to the motor.
Black Fiberglass mounting stands have holes drilled in the bottom to allow epoxy to flow into them to make a supperior bond. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.
Fits most 380, 540, 550, 600 motors.
Feigao & Nemesis 380, 540, Hacker B50, B50L & B50xl.
Leopard 2845, 2860, 3640, 3650,3674
Aqua SuperVee motor.
Ammo 2300 Motor.
Total width of 62mm including the mounting stands.
Metal center mounts measure 54mm wide.
Fits most motors that use a 19mm to 25mm mounting hole spacing, as long as the motor mounting screw is not larger than 3mm.
Requires you to provide motor mounting screws.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.