Etti 4mm to 3/16"(4.75mm) prop adapter.
This is used if you are trying to adapt a 3/16"(4.75mm) propeller to a 4mm threaded shaft.
How this works...
The threaded drive dog is first threaded onto your 4mm threaded shaft. Slide your propeller onto your shaft. Then install and tighten the included adapter/propeller nut. Keep in mind, you need enough threads on your shaft to fit the prop hub you are trying to adapt.
(1) 3/16"(4.75mm) adapter/propeller nut
M4 threaded shafts
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.