OSE Strut and Upgraded flex cable assembly for the Proboat Shockwave 26" Brushless Deep-V RTR PRB08014 Includes everything in picture 1. We have designed a new strut with a few changes. -Added a replaceable, lead/teflon strut bushing. -Changed the strut to work with 3/16" prop (4.75mm) shafts. The stock strut is for 5mm shafts. Included with this kit is an upgraded US Made .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!
No soldering or cutting required! Includes(All parts in picture 1): Ose .150" (3.80mm) cable with 3/16"(.187, 4.75mm) propeller shaft. OSE Sw26 Strut pn# ose-83390 Octura slim nut. Octura Bullet Nut, pn# oct-oc6pnmm Note: -Some of the stock Proboat props are a bit smaller than 3/16" and may need to be drilled or filled to fit this system. This system will work with the stock proboat coupler.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.