HRC Rail mount for Neu 1521, 1527, 1530 motors when used with 4mm Screws.
These can be used to convert nitro/gas hulls to electric power. Slotted mounting holes for ease of alignment. Vented front mounting plate to aid the in cooling of the motor.
Neu motor with 4mm screws, spaced 30mm apart.
Mounting screws (longer may be required if rails are thicker than normal).
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.