Leopard 4074 & 4082 Water Jacket, Extra Long Version.
This jacket is designed to fit the Leopard 40mm diameter Motors that are 74mm & 82mm Long.
This Water Cooling Jacket has been designed for maximum heat reduction. At 57mm(2.24") long, the jacket is long enough to allow for maximum cooling. Yet weighs less than 2.65 ounces. We picked high quality aluminum for the jacket to further help with the cooling, as the aluminum acts as a added heat sink. Than we added brass water fittings.
Installation is a snap! Apply some oil/grease to your motor housing and the o-rings on the jacket, than slide on the jacket.
Approx. 2.24" (57mm) long x 1.92" (48.5mm) in diameter.
NOTE: Because of the extra long length, this will only work with with the ose-80600 and ose-80610 if the rear clamp is not used! When used with the ose-80600 or ose-80610 mounts in a flat bottom boat, IE a cat or hydro, you will have to raise the mounts for clearance.
*Pictured is the 4074 Length Motor. Motor not included!
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.