This is the K&S Wire Bender & Coiler. Can be use to bend/coil Aluminum, Brass, Stainless Steel, & music wire Features: Black steel construction Includes: One base, One bending handle, One instruction sheet attached to top of box Requires: When using, the base should be secured in a bench mounted vise Specifications: BASE HANDLE Length: 2½" (64mm) 11½" (292mm) Width: 1½" (38mm) Height: 5/8" (16mm) Not including peg Diameter: 11/16" (18mm) Notes: Will bend wire from 1/8" to ¼" (3mm-6.5mm) in diameter Will coil wire 1/8" to 3/16" (3mm-4.5mm) in diameter
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.