MPB mount mount for motors 36 & 40mm in diameter. -GFK = Glass reinforced plastic.-Angle has 4 slots to allow straight alignment with propeller cable. Once set and glued there is no need to ever worry about the motor plate coming out of alignment. -Mounting plate can be use in flat bottom hull like a rigger/hydro or if the mounting plate is flipped upside down it can be used to get the motor deep into the bottom of a vee bottom hull (see picture #2). -The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. Requires:Motor mounting screws.Motor with 3mm screw and 25mm mounting hole spacing. Includes:Everything in picture #3
Not logged in
Help & FAQ
© Copyright 2020 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.