OSE assembled .250 (1/4") cable to 1/4" propeller shaft w/stepped down shaft end for 3/16"(.187) Propellers. This item can be used with the 1/4 struts but has the ability to use the smaller 3/16" props for better tuning.
This shaft can be used with 3/16" drive dog style props.
To use this with 1/4" drive dog style props, please purchase Octura part# oct-oc68rb.
18", 24", 30" or 36" total assembled length.
3/16" Drive Dog or for large hub props you can put on a 1/4" drive dog on the 1/4" section.
10/32 threaded nut.
Teflon tubing 1/4" size
The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft. Flex cable lengths are approximate. They can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.