Carbon fiber, Water cooled heavy duty motor mount for 40mm motors.
Example, TP 40xx, Leopard 4074, 4082 and 4092 brushless Motors.
Fits 40mm diameter motors that are 60mm or longer in length.
Both water cooled and adjustable. Rear motor clamp helps carry the weight of the heavier/longer 40mm motors. Angle is adjustable to allow straight alignment with propeller cable.
The anodized aluminum mounting plate with extended Carbon fiber mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can will fit a vee bottom or similar hull. It will require modifying to fit a flat mounting area like a rigger or hydro.
Fits most 40mm motors that are 60mm or longer.
For example Tp40xx, Leopard 4065, 4074, 4082 and 4092
Will fit upto a 50mm long water jacket.
Total width of 58mm including the mounting stands.
Metal center mounts measure 54mm wide.
Requires you to provide motor mounting screws.
Comes with mount only.
Not logged in
Help & FAQ
© Copyright 2017 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.