Fits motors 40mm in diameter that are 82mm long and longer. For example Neu, Leopard TP and the other popular sizes. Additional rear motor clamp helps carry the weight of the long 40mm motors.
Angle is adjustable to allow straight alignment with propeller cable. The aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.
Requires you to provide motor mounting screws.
Picture 1, displays a Leopard 4092 motor. The maximum length water jacket is the 4068 Jacket.
Picture 2, displays a neu 1530 motor. The maximum length water jacket ham-neu1524.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.