40mm Quick Change Mount, designed by Anthony Vaccaro.
Designed to speed up swamping of a motor during a race or if your just tired of trying to remove the front screws on your motor for maintenance.
Once the coupler is loosened, the motor can be removed in less than a minute. Normally racers would have to remove the front screws which could take a few minutes and more importantly, once a motor is removed in a conventional mount, the motor angle has to be realigned. With only 4 screws the motor is removed, while maintaining the motor angle. Also features clear access to the front motor vents to allow maximum cooling. See video for a quick change.
Carbon fiber stands
Aluminum cnc motor brackets.
Motors with 4 Bolt front motor plates, Tested to work with Leopard 4 Bolt Front plate 40mm Motors.
You to provide motor mounting screws.
Mount in picture 1
Not logged in
Help & FAQ
© Copyright 2017 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.