OSE Veles heavy duty flex cable assembly.
This is for customers with a heavily modified ProBoat Veles 29 boat that are using 4074 and 4082 motors in. This cable is made with thicker gauge .187" Cable assembled to a 3/16"(.187) prop shaft and bullet nut. The cable we use is over 20% thicker than the stock ProBoat cable.
This is cut and ready to install in your boat (requires ose-81518).
No soldering or cutting required!
NOTE: This will NOT fit a Stock Boat without the following additions.
Requires: ose-81518 5mm to .187 Coupler and removal of stock proboat Teflon liner.
This can also be used in any other boat requiring a .187 cable that measures approx 335mm from tip to tip.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.