OSE Raider Motor & Water Jacket.
Neu Motors officially licensed motor design. Offshore Electrics had Neu Motors design a 36mm x 60mm motor for Offshore Electrics that can be used in the 4s racing classes.
36mm diameter by 60mm long brushless motor. Winding wire is rated at 392F with Polyester insulation for high efficiency of up to 90%. Comes with high quality EZO Japanese bearings and High temp neodymium, N38UH 180C rated magnets for high power. Includes vented endbells that are assembled with screws for both strength and ease of maintenance.
The included water jacket holds a large volume of water inside and also includes large brass fittings that are offset to reduce the amount of air inside the jacket.
Size: 36mm diameter x 60mm long
Magnets: High temp neodymium, N38UH 180C rated
Watts: 1000 watts
Motor Shaft: 5mm
Can Measures: 36mm diameter x 60mm long
Weight: 240 Grams
Mounting Screw diameter required: 3mm
Bearing size: Flanged 13mm x 5mm x 5mm double shielded EZO Japanese bearings.
Wires: Rated at 392F with Polyester insulation. Solid for higher amps. (no solder joints)
Mounting Holes 25mm apart for use with most 540 mounts.
Front and Rear vented end caps for additional cooling.
OSE Suggests 20,000-35,000 total rpm for boats. We suggest most Fast Electric Boaters should run in the 25,000RPM range for Sport Boating or 30,000RPM Range for racing. These are only guidelines, we suggest if you do not have the knowledge to pick the correct motor, please consult us first or other members of the rc fast electric boating community. Either at a local club or on our OSE Forums.
Not logged in
Help & FAQ
© Copyright 2017 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.