OSE Strut and Upgraded flex cable assembly for the Proboat Blackjack 24 Catamaran.
Includes everything in picture 1.
We have designed a new strut with a few changes.
-Added a replaceable, lead/teflon strut bushing.
-Changed the strut to work with 3/16" prop (4.75mm) shafts. The stock strut is for 5mm shafts.
-Increased the length of the knife edge on the front of the blade.
-Included a bullet nose cone to reduce drag.
Included with this kis is a upgraded US Made .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!
No soldering or cutting required!
This can also be used in any other boat requiring a .150 cable that measures 11.6" (295mm) from tip to tip.
We suggest using part number oct-ocfhe5mm15s coupler with this shaft and the Proboat Blackjack 24.
Includes(All parts in picture 1):
Ose .150" (3.80mm) cable with 3/16"(.187, 4.75mm) propeller shaft.
OSE BJ24 Strut
Octura slim nut.
Octura Bullet Nut, pn# oc-oc6pnmm
Note: Some of the stock Proboat props are a bit smaller than 3/16" and may need to be drilled or filled to fit this system.
Not logged in
Help & FAQ
© Copyright 2018 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.