8mm External safety loop kit.
This is required by AMPBA for all electric club racing boats
8mm terminals, 8AWG wires
NOTE: Solder the wires to be switched directly onto the large copper washers supplied
Brass terminals will need to be insulated on carbon fibre hulls. I've found an acrylic plate epoxied or screwed onto the carbon fibre works well.
Manufactured by: RCBB
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.