Aluminum grommets for rubber tubing. These are used so you can run one piece of tubing from the water pickup to the motor or esc in your boat. These are simple to install. - 6.8 mm tubing or ose-tubing-9/32-clear Installation note: First cut a 45 degree angle on the tubing. Then apply a thin coating of oil on the outside of the tubing. Start the tubing into the hole, then pull the tubing through the grommet from the opposite side with a pair of pliers. Includes: (2) Per pack Material: Silver anodized aluminum Note: Picture on boat is for display only. This item only contains (2) grommets.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.