For a limited time, Free shipping within the United States.SEAL Series 200 amp v2 2s-8s Lipo brushless esc. Includes built in 6v/8a BEC
Specs: Waterproof design (rates as IP 67) allows this ESC to work in wet conditions. Continuous Current (A): 200Amps Burst Current (A): 300Amps Voltage 5-24NiMH : 2s to 8s LipoBattery Eliminator Circuit (BEC) output: 6 volts, 8 ampsPower Wire: 10AWG，160mm-Red/160mm-Black Motor Wire: 10AWG，160mm-BlackOptional programing with LCD programming card.Throttle works in forward and reverse.Case dimensions (not including wires): Length: 93mm (3.66") Width: 56mm (2.21") Height: 41mm (1.62") from bottom to top of capacitors. Weight: 350g (12.34Oz) Includes: Everything in picture number one.Requires: Connectors, 5.5mm bullet connectors or larger. This esc was designed to work in an environment where its possible for the esc to get wet on occasion. Not for use underwater. OSE does not suggest using this item under water!!This esc is suggested for smaller boats upto the 27"- 40" (550mm - 1000mm) range. Because there are so many variables with each hull and installation its impossible to specify all the applications for this esc. If you have any questions on using this esc with your particular boat, please contact us before purchase.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.