Demon Rigger Hull Kit by Etti Racing.

AS of this moment the kit does NOT come with instructions! Because of this we recommend this kit for the experienced builder only.

Package includes the following parts.

- GFK Fiberglass center "tub" section.
- CFK Carbon Sponsons "Version II" (1 Pair)
- Aluminum tubing
- Carbon Fiber tubing for booms
- Motor Mount

Specs:
Length: 650mm
Width: 80mm
Height: 60mm
Hull weight: Less than 1 pound.

Requires:
Assembly.
Radio system and all electronics.
Cable and prop shaft.
Strut and strut bracket.
Rudder.

The Raider 25 Deep Vee Race  Boat is exclusively built for OffshoreElectrics by the guys at Aeromarine. Aeromarine is building these using their system of light weight fiberglass with a carbon fiber floor in the motor mounting area for added strength. We stock these in white, but we can special order yellow or blue by request.

Speeds up to 45mph

Click for Video

*Measures 24.5 x 6.75"
Decals not included.

This light weight fiberglass Hydro is built for Fast Electric Rc Boat Racing. Designed to fit in the Namba LSH race classes. This hydro will work well with Brushless power on 4s Lipos or a Brushed 700 motor. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 24.25" x 13.00" Comes as a bare hull. 
 

Titan 29 is a Deep Vee  hull that is built light with Fiberglass and carbon fiber floor for added strength.
It can be powered from 12 cells all the way up to 18 NiMH Cells.
Up to 4s Lipo 

Speeds up to 45mph

*Measures 29" x 10.5"

Recommended hardware:
Speedmaster 3/16 Stinger Strut.
Speedmaster 21 Mono Rudder.
Medium Size Turn Fins.
.150 or .187 Flex Cable, which one depends on power. Email us for help with your setup.

The Challenger Deep Vee Mono hull that is built light with Fiberglass and carbon fiber floor for added strength. 

This is a special order item. It takes 1-2 weeks to recieve it.

It can be powered by

12 to 18 NiMH cells or
4s or 6s Lipo 

Speeds up to 50 mph
*Measures 31" x 9.50"

Titan 33 is a Deep Vee  hull that is built light with Fiberglass and carbon fiber floor for added strength. This particular hull is one of the top performers in Namba's P or Q Mono and Offshore Race Classes.

It can be powered from 12 cells all the way up to 24 NiMH cells. 
Or
4s to 6s Lipo Power

Speeds up to 55 mph
 
*Measures 33.25" x 10.5"

Rio Roses Stepped Mono hull that is built light with Fiberglass and carbon fiber floor for added strength. 

This is a special order item. It takes 1-2 weeks to recieve it.

It can be powered by
6 to 12 cells NiMh or
2s to 4s Lipo
 
Speeds up to 40 mph
*Measures 30" x 6"

This fiberglass hull is a lightweight version of the "Mean Machine" Cat a inlaid  Carbon Fiber tunnel section for added strength.

It can be powered from 12 cells all the way up to 18 NiMH cells.
Or
4s to 6s Lipo

Speeds up to 60mph

*Measures 29.5" x 11"

Aeromarine Sprint Cat 40 with Turbine Hatch.

Comes in Electric layup with 5" Rails or Electric layup with carbon fiber reinforced tunnel floor with NO stringers.

36" Length, 14" Wide
Weights Approx 4 pounds 8 ounces.

Click picture for More Details!

Delta Force 26 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 25.5" x 8"

Delta Force 29 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

If you are looking to move your SuperVee 27 Electronics and Hardware into a new hull for better handling, this hull is the ticket!

Measures: 29.5" x 9.5"

Delta Force Cyber Storm 33 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric or Nitro Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls. No painting required.

Measures: 32.25" x 9.25"

Comes as a bare hull.

Delta Force 33 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 33.25" x 10.25"

These hulls come in two options.

With wooden motor rails which are professionally installed and have a 4" wide spacing. This is a $20 option.
Or Without Rails.

 

Delta Force 35 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 35.50" x 10.35"

Hull includes installed rails that have a 4" wide spacing for rail style motor mount.

Delta Force 41 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 41.5" x 11.75"

Comes as a bare hull.

Ships as Oversized.

More pictures  to come.

Delta Force Sniper 45 Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures: 44.5" x 13.125"

Comes as a bare hull.

Includes installed rails that have a 5" wide spacing for rail style motor mount.

Ships as Oversized.

Click picture for more info.

The Delta Force Vortex 16 Hull Only!

These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures:
420mm Long x 210mm Wide x 75MM height

Designed and built by Joseph Toth in Europe.  This hull is hand made using fiberglass with a gelcoat finish that requires no painting. During the process, the hulls are vacuum bagged to remove any excess resin, making these one of the lightest and strongest electric hulls on the market today! 
 
This is a special order only if you would like it with hardware installed. Availble in White, Red, Yellow or Blue. 6-8 week delivery time. Email us for more details.

We offer this hull in two versions, "Bare Hull" or
"Hull with hardware".

The "Bare hull" is just that, NO hardware and NO mounting brackets. Install all your own favorite parts.

The "Hull with Hardware" version comes with all the hardware, mounting brackets installed and included boat stand. Just add motor, electronics and your off. Stickers not included.
 
If you demand the very best, the ToysPort hulls are where its at! 

The Ozone Vee bottom with integrated flood chamber. The flood chamber will make the hull roll back over after a flip! This is very handy in race situations! When most boats are done with the race after a roll, the Ozone will self right in a few seconds, allowing a finish!

Suggested Power:
6 to 12 Nimh cells or
2s-3s Lipo

Feigao 540 L size motor or similar.

Measures 23" long
The bare hull weight approx. 250 grams!

Click Picture for more info and details.

Designed and built by Joseph Toth in Europe.  This hull is hand made using fiberglass with a gelcoat finish that requires no painting. During the process, the hulls are vacuum bagged to remove any excess resin, making these one of the lightest and strongest electric hulls on the market today!

The Syncron Vee bottom  with integrated flood chamber. The flood chamber will make the hull roll back over after a flip! This is very handy in race situations! When most boats are done with the race after a roll, the Syncron will self right in a few seconds, allowing a finish!

*Measures 28.5" x 8"

We can also special order this in White, Red, Yellow or Blue. 6-8 week delivery time. Email us for more details.

Click Picture for more Details.

The Triton Vee bottom with integrated flood chamber. The flood chamber will make the hull roll back over after a flip! This is very handy in race situations! When most boats are done with the race after a roll, the Triton will self right in a few seconds, allowing a finish!

This is a special order only. Availble in White, Red, Yellow or Blue. 6-8 week delivery time. Email us for more details.

It can be powered by 12 to 24 cells. 
*Measures 31.75" x 9.25"

We have the bare hulls instock for immediate delivery.
For hulls with hardware professionally installed we can special order them. Please contact us for details.

Click picture for more hull details.

This is the newly designed Jolly Catamaran by Toysport. At only 39 ounces with running hardware and mounting brackets its a feather weight that will pack a solid punch!

We offer this hull in two versions, "Bare Hull" or
"Hull with hardware".

The "Bare hull" is just that, NO hardware and NO mounting brackets. Install all your own favorite parts.

The "Hull with Hardware" version comes with all the hardware, mounting brackets installed and included boat stand. Just add motor, electronics and your off. Stickers not included.

It can be powered by 12 to 24 cells.

*Measures 34.5" x 10"

Click for more details.

This is the newly designed Jolly Catamaran with twin adjustable outrives by Toysport.   

*Measures 34.5" x 10"

Click picture for full details!

"Rigged Insanity" boat kit by Osborn Model Boats.

Want to get into "Fast Electric" boat racing? Or just want to "fly" around your local pond at "insane speeds"? This is the kit for you!! This laser boat kit comes with all the essential parts to build yourself a high quality racing "rigger" hull. Quality laser cut parts and detailed instructions with full illustrations, make this a  easy build for the first time builder. This is a great boat for a 2s Lipo system or a 4s stock class motor system like the AquaCraft 2030 system.

Specifications:
Length 26.9"
Beam 14"

Carbon Fiber & Polycarbonate Boat Stand.

Dimension: (300 x 150 x 95mm) L x W x H

Suitable for  500mm to 800mm (20" to 32" ) RC Boats

Etti Speedy Clamps for Demon Rigger.

Specially designed for tightening 8mm Aluminum tube together with 6mm carbon fiber tube. It is designed for replacing the sponson speedily in a very short time in case the carbon fiber tube is broken during the race! (No glue nor re-drill the carbon fiber tube are required anymore!!!)

This handy part is made of 6061 Aluminum. (Pack includes 8 clamps)

Zipp Kits JAE21 FE

Works great with 4s lipo system like the AquaCraft 2030 Combo.

This is a complete hull kit. Full assembly required. No hardware included.

JAE 21FE Specifications:
Length- 31.5 inches
Beam- 16 inches
Weight- 3-4.5 pounds 

NOTE: This item requires Shipping by UPS for Domestic orders and ExpressMail for International Orders.

*Picture is of a painted and finished JAE 21 Rigger. Kit comes in wooden parts that need to be assembled and painted.

Click link for Manual and required parts
http://www.zippkits.com/21FE.pdf

Etti Carbon Racing Rigger Sponsons.

Specs:
Length: 280mm
Width: 60mm
Height: 50mm

This item contains only the sponsons.

This is the modern looking cowl/hatch upgrade for the AeroMarine Mean Machine. It fits better than the stock hatch and tapes down 10 times easier. Made of fiberglass and available in either a painted white or yellow color that closely matches* the stock AeroMarine hull.

Includes: Hatch ONLY.
Can NOT ship by priority mail when shipping outside the USA.
Shipping outside of the USA requires ExpressMail Shipping.

More colors coming in the upcoming month.
*Yellow color is not exact to Aeromarine Hull.