where to buy carbon fiber cloth and resin

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • meangenesracing
    Fast Electric Addict!
    • Jun 2012
    • 1158

    #1

    where to buy carbon fiber cloth and resin

    is there a local place like maybe home depot, pep boys, a boat dealer, who sells this kind of stuff or can i only get it online any and all help welcomed and thanks in advance
  • JohnZ
    Senior Member
    • May 2010
    • 254

    #2
    It looks like you're going to have to get it online:http://www.fibreglast.com/
    CST has been providing high quality, lightweight composite materials for model builders, educational projects, research and development since 1988. We stock a wide range of structural materials in carbon fiber, aramid (Kevlar) and fiberglass, including woven and unidirectional fabrics, braids and mats (veils), solid and hollow rods, wrapped tubes, rectangular shapes, carbon fiber and fiberglass plates and sheets and sandwich panels, epoxy systems, vacuum bagging and wet lay up molding supplies.


    These three stock CF cloth, tube, rods etc.
    Check pricing.....you will not be able to purchase a small swatch, more than likely you will have to purchase a given amount.
    You also might check with Randy at BBY. http://www.bbyracing.com/ I know he has this stuff for his boats and would probably sell you what you need.
    Good luck.

    Comment

    • T.S.Davis
      Fast Electric Addict!
      • Oct 2009
      • 6221

      #3
      America's leading distributor of composite materials. We combine superior products and the industries' lowest prices with fast and accurate service.
      Noisy person

      Comment

      • iridebikes247
        Fast Electric Addict!
        • Dec 2011
        • 1449

        #4


        keith bradley has the best cf out there, between my friend and myself we've tried a lot of different fabrics this stuff is just unreal. its thick and its easy to get nice clean cuts even without tape. you can also use carbon kevlar its good stuff too.
        Youtube: https://www.youtube.com/channel/UCSr...6EH3l3zT6mWHsw

        Comment

        • meangenesracing
          Fast Electric Addict!
          • Jun 2012
          • 1158

          #5
          ok thanks i got some today along with the resin i have a aeromarine avenger cat im thinking about doing the outside has anyone done this? looks like i wont be able to get it up in the inside front as i want some reinforcment because i plan on putting in twin neu 1521 1y. thanks in advance for any help

          Comment

          Working...