Traxxas Brushless Edition E-Maxx RTR Low Use

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JMSCARD
    Fast Electric Addict!
    • Mar 2010
    • 3444

    #1

    Traxxas Brushless Edition E-Maxx RTR Low Use

    I have my low use Traxxas EMaxx Brushless Edition, 12 total 4s only cycles of batts through the truck.... just not into trucks much anymore, but will say this is one of the best all around RC trucks out there no question..

    Truck was run on 4s ONLY, it has never seen 6s.... it can run 6s but I didn't care to as 40mph on 4s is fast enough for what I like to do with the truck. This E-Maxx is very clean and SUPER smooth... very good condition, never been bashed.

    Truck is VERY clean, and has ZERO issues... the drivetrain is VERY smooth, and it is 100% stock except for the front RPM upper and lower arms...

    Included is everything to run and the stock radio of course, the only marks are where I ran it for about 5 runs and noticed the front skid plate loose and it cracked around a couple of the holes as it was moving around while running before I noticed it was loose, I tightened it up, and no reason to even replace as its only the skid plate and is still functional... its only the skidplate and its fine as is, I would only mess with taking the 6 screws out and replacing it for $5 if it bothers you, it didn't me... the truck is very low use, and I tried to take pics to depict it... the tires are the stock originals, and the driveshafts are stock originals... the only time these rigs break is when people bash them horrifically on 6s... run 4s like I did and its a hoot, and doesn't cause you to break anything hardly ever...

    Spare parts included as seen in pics, everything seen is included.

    LAST note, this is a REAL Brushless Edition, ... it has the 17mm hexes foor the wheels, and the Mamba 2200kv with Mamba Monster ESC...

    I will include 2 5200mah 50c 2s lipos to make it rtr.. they only have 12 cycles and work and run PERFECTLY and powerfully, but they are puffy, still balance, and hold a charge fine.

    $475 plus exact shipping to your location. Please reply in post, and I can get shipping costs to prospective buyers just need a zip code.

    PRICE DROP! $450 Plus Exact Shipping to your location... I'm going to part this out if it doesn't sell at this price.
    Attached Files
    Last edited by JMSCARD; 03-17-2015, 12:53 PM.
  • JMSCARD
    Fast Electric Addict!
    • Mar 2010
    • 3444

    #2
    More pics

    And just in case anyone is wondering, these come with the Mamba Monster (stout esc) and the black edition 1515 2200kv Castle motor.... they are VERY powerful trucks.
    Attached Files
    Last edited by JMSCARD; 03-13-2015, 12:37 PM.

    Comment

    • runzwithsizorz
      Senior Member
      • Jan 2009
      • 896

      #3
      The *adjustable* wheelie bar was a nice touch, especially for pavement.

      Comment

      • JMSCARD
        Fast Electric Addict!
        • Mar 2010
        • 3444

        #4
        Price Drop, $450 plus exact shipping.....

        and yes the wheelie bar that they added to the Brushless Edition works wonders, works well in upper position for riding parking lot long wheelies also :)

        Comment

        • Make-a-Wake
          FE Rules!
          • Nov 2009
          • 5557

          #5
          You may wanna try ebay if it doesn't sell here with what could be minimal interest being a boat Forum. You have it priced very fairly and that's a lot of truck for the $$ compared to what they bring on ebay
          NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

          Comment

          • JMSCARD
            Fast Electric Addict!
            • Mar 2010
            • 3444

            #6
            Originally posted by Make-a-Wake
            You may wanna try ebay if it doesn't sell here with what could be minimal interest being a boat Forum. You have it priced very fairly and that's a lot of truck for the $$ compared to what they bring on ebay
            I have it listed elsewhere too, just not ebay.... ebay gets 10% plus a listing fee, on top of the 3% paypal... so If I get $440 out of it here, its the same as near $500 there... but I have seen them go for around $550-600 RTR with batts in used condition... I'll give it another couple days... and I think I'm going to break it down, keep the motor :) and waterproof digital servos along with radio/rxr , and sell the roller separate, and the Mamba Monster separate.... probably better off that way too!

            Thanks though for the advice.... been on the fence whether or not ebay was worth it, figure the FE boat guys might want a ballistic big truck to play with maybe when they cant make it to the water haha

            Comment

            • Make-a-Wake
              FE Rules!
              • Nov 2009
              • 5557

              #7
              Rollers are bringing $250+
              NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

              Comment

              Working...