OSE carbon-fiber stuffing tube mount with fitting for oiling your cable.
Carbon fiber stands and aluminum center section. The carbon stands have glue holes for secure mounting to the inside of your hull and two long slots for stuffing tube height adjustment. The aluminum stuffing tube holder can also be angled
Comes in 3 sizes
ose-83010-7/32 for K&S 7/32 stuffing tube.
ose-83010-1/4 for K&S 1/4 stuffing tube.
ose-83010-5/16 for K&S 5/16 stuffing tube
Drill 4mm hole in the stuffing tube in the area that you want to install the mount BEFORE trying to tighten the screws on the mount. Do not over tighten the screws on the mount. Over tightening will strip the mounts. We also recommend silicon sealant in between the mount and stuffing tube for a good seal from leaking. The oiler will NOT work with stuffing tube system that use a teflon liner.
Picture 2 shows all three stuffing tube sizes. Note all the mounts are identical, only the center hole for the stuffing tube is different.
Not logged in
Help & FAQ
© Copyright 2020 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.