OSE assembled .250(1/4") Reversed cable with 1/4 Propeller shafts. These can be used with 1/4"(.250") struts.
NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props. Specs: Flex Cable diameter: 1/4 (.250", 6.35mm) Propeller Shaft length: 4.25" (108mm) Propeller shaft diameter: 1/4" (.250", 6.35mm) Assembled length: 18", 24", 30" or 36"
Requires: 1/4" Drive Dog 1/4 threaded nut. Teflon tubing 1/4" size
Note: The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft. Flex cable lengths are approximate. They can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.