Etti adjustable motor mount for 380 to 480 sized Motors with 19mm motor mounting holes!

Fully adjustable in height and motor shaft angle, makes this one of the easiest mounts to align perfectly with your drive shaft.

The mounting plate can be flipped over so it can be mounted deep into a monos deep vee or on a flat surface like a catamaran or hydro.

Motor plate is anodized blue, Brackets are black fiberglass.

Applications:
Fits 380 to 480 sized Motors with 19mm motor mounting holes!

Etti adjustable motor mount for 380 inrunner or outrunner motors with 25mm motor screw spacing.

Requires:
Motor screws. Mounting of the unit in the hull. And gluing of the water inlet and outlet in the desired position.

Etti adjustable motor mount for 500  to 600 size motors with 25mm motor hole spacing.

Fully adjustable in height and motor shaft angle, makes this one of the easiest mounts to align perfectly with your drive shaft.

The mounting plate can be flipped over so it can be mounted deep into a monos deep vee or on a flat surface like a catamaran or hydro.

Space between mounting stands is 56mm.

Motor plate is anodized blue, Brackets are black fiberglass.

Applications:
Fits most 540, 550, 600 motors.
Feigao & Nemesis 540, Hacker B50, B50L & B50xl.
Neu motors with 25mm mounting hole spacing, like the 1506, 1509, 1512, 1515 series.
Aqua SuperVee motor.
Ammo 2300 Motor.

Fits most motors that use a 25mm mounting hole spacing.

Adjustable motor mount for 380 sized motors.

Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate is water cooled for added insurance against over heating. This can come in handy with both inrunner and outrunner style brushless motors. Its especially useful in outrunner motors, that do not have water cooling fitted to the motor.

Fiberglass mounting stands have holes drilled in the bottom to allow epoxy to flow into them to make a supperior bond. This mount will only fit vee bottom boats.

Applications:
Fits most 380 motors.
Feigao & Nemesis 380

Fits most 28mm Diameter motors that use a 16mm to 19mm mounting hole spacing, as long as the motor mounting screw is not larger than 3mm.

Requires you to provide motor mounting screws.

Adjustable motor mount for 380, 500, 540 sized motors with adjustable motor hole spacing from 19mm to 25mm.

Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with Fiberglass mounting stands that have holes drilled in the bottom to allow epoxy to flow into them to make a supperior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Applications:
Fits most 380, 540, 550, 600 motors.
Feigao & Nemesis 380, 540, Hacker B50, B50L & B50xl.
Aqua SuperVee motor.
Ammo 2300 Motor.

Fits most motors that use a 19mm to 25mm mounting hole spacing, as long as the motor mounting screw is not larger than 3mm.

Requires you to provide motor mounting screws.

Adjustable water cooled motor mount for 380, 500, 540 sized motors with adjustable motor hole spacing from 19mm to 25mm.

Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate is water cooled for added insurance against over heating. This can come in handy with both inrunner and outrunner style brushless motors. Its especially useful in outrunner motors, that do not have water cooling fitted to the motor.

Fiberglass mounting stands have holes drilled in the bottom to allow epoxy to flow into them to make a supperior bond. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Applications:
Fits most 380, 540, 550, 600 motors.
Feigao & Nemesis 380, 540, Hacker B50, B50L & B50xl.
Aqua SuperVee motor.
Ammo 2300 Motor.

Fits most motors that use a 19mm to 25mm mounting hole spacing, as long as the motor mounting screw is not larger than 3mm.

Requires you to provide motor mounting screws.

Water cooled and adjustable motor mount for 540 XL sized motors. Additional rear motor clamp helps carry the weight of the heavier 540 XL motors. Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended fiberglass mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Click picture for more info. Water cooled and adjustable motor mount for 540 XL sized motors. Additional rear motor clamp helps carry the weight of the heavier 540 XL motors. Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Water cooled and adjustable motor mount for Leopard 4074 & 4082 brushless Motor.

Additional rear motor clamp helps carry the weight of the heavier 4074 & 4082 motors. Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended fiberglass mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Water cooled and adjustable motor mount for Leopard 4074 & 4082 motors.

Additional rear motor clamp helps carry the weight of the heavier 4074 & 4082 motors. Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

40mm water cooled motor mount.

Fits motors 40mm in diameter that are 82mm long and longer. For example Neu, Leopard TP and the other popular sizes. Additional rear motor clamp helps carry the weight of the long 40mm motors.

Angle is adjustable to allow straight alignment with propeller cable. The aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Requires you to provide motor mounting screws.

Comes with mount only. Motor and water jacket only in pictures for display purposes.

Carbon fiber rail style mount for 40mm water cooled motors with integrated servo holder.

Fits motors 40mm in diameter that are 74mm long and longer. For example Neu, Leopard TP and the other popular sizes. Additional rear motor clamp helps carry the weight of the long 40mm motors.

Angle is adjustable to allow straight alignment with propeller cable. The aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fits only deep vees. If will not work with a flat style hull bottom, like a hydro/ rigger or catamaran.

Requires you to provide motor mounting screws.
NOTE: Distance between from and rear plate is 62mm, keep this in mind when ordering a water jacket for your motor. We suggest a 50mm long jacket.

Comes with everything in the picture.

This is the 40mm rear motor clamp ONLY.

This can be used as a replacement part for your OSE-80600 / OSE-80610 mounts or if you have a OSE-80200 / OSE-80210 36mm mount and want to upgrade to a 40mm motor you can also use this item.

NOTE: Clamp only, not the entire mount.

Comes with orange clamp & tigthing screw. No mounting screws.

OSE Angled Motor Mount.

The bolt pattern is 25mm, so it will fit lots of popular 36mm & 40mm brushless motors. CNC cut aluminum with glue holes for added strength.

*Motor not included. Shown with Leopard 4082 motor installed on it.

OSE 56mm Angled Motor Mount for 56mm diameter motors.

CNC cut aluminum mount works well in narrow areas like catamaran sponsons where there isn't enough room for an adjustable mount. The fixed angle is ridged enough for the longest of 56mm motors. Shown in picture with Leopard 5692(not included) and Ham-leopard-56L water jacket(not included).

Specifications:
Motor holes are 30mm apart.
Holes for 4mm screws.
67mm (2.64") wide.
Weight 3.4 ounces

Requires:
Installation, Glue and fiberglass to fix the mount into the hull.
Motor mounting screws.

Adjustable 56mm Motor Mount.

Works with 56mm motors. For example Leopard 5692, 5692 and 56110. Integrated top plate can be used to mount an esc. All Aluminum construction.

Note: If mounted in a flat bottom hull, this will require mounting blocks to lift the rear of the mount. Works with upto a 75mm long water jacket.

This high strength composite motor mount will fit either a 500, 600 or 700 brushed motor, Feigao 540 motors. Making it a very versatile mount. The bolt pattern is 1" or 1 1/8" inch, so it will also fit lots of popular brushless motors. 

Attention:
A 700 motor will not fit with a cooling coil installed on it.
A Feigao 540 brushless motor will fit with a pn#ose-mjacket cooling jacket installed.

This is the motor mount designed to fit the Zippkits JAE 21 Rigger. This mount has 1/2" center hole to allow the use of a thrust bearing.

Fits 36mm diameter / 540 sized motors with 25mm motor mounting hole spacing.

This is the motor mount designed to fit the Zippkits JAE 21 Rigger.

Designed for 36mm / 540 sized motors with 25mm motor mounting hole spacing.

5692 Motor Mount with integrated esc mount.
Carbon and aluminum construction.

Note: If mounted in a flat bottom hull, this will require mounting blocks to lift the rear of the mount.

Discontinued, Click here for the OSE-80902 Mount which replaced this item.

We have increase the material thickness to almost 1/8" thick. This has strengthened the mount for some of the heavier Brushless motors now available.

This aluminum motor mount was designed by FE Boat Racer Doug Robichaud to allow a 700 motor and brushless motors with front vent holes to achieve maximum cooling. This is our fourth revision of this mount. We have made the vent holes larger which will let the air flow threw the entire motor keeping it much cooler than a motor mount with the holes blocked. We also added elongated slots for mounting the mount to the hull with screws. The slots will fit up to a 6-32 machine screw (not included).

The bolt pattern is 1" or 1 1/8" inch, so it will fit lots of popular 36mm brushless motors, like the Feigao 540's, Aqua Sv, blackjack 26 motors and many brushled motors in the 500, 600 & 700 size range.  Making it one of the most versatile mounts on the market. Center hole is 5/8". Material is .122 in thickness.

Available three ways.
 
"Standard" good for a 700 motor with a cooling coil.
"Low" is good for a 700 without a coil or a 36mm brushless motor with cooling jacket.
"Flat" No bend, Bend it how you want it.