Click picture for more details.

ABC 1.5 Inch (38.1mm) diameter Propellers.
Availible in three different pitches.
 
1514-10-50(2) CLL 1.4 Pitch Ratio
1516-10-50(2) CLL 1.6 Pitch Ratio
1518-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 1.5 Inch, 38.1mm diameter,
Reversed rotation, 3 Blade Propellers.

1516-10-50(3) CLR

Attention! This prop is made for boats that require a clockwise spinning prop!

Click picture for more details.

ABC 1.6 Inch (40.6mm) diameter Propellers.
Availible in three different pitches.
 
1614-10-50(2) CLL 1.4 Pitch Ratio
1616-10-50(2) CLL 1.6 Pitch Ratio
1618-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 1.7 Inch (43.2mm) diameter Propellers.
Availible in three different pitches.
 
1714-10-50(2) CLL 1.4 Pitch Ratio
1716-10-50(2) CLL 1.6 Pitch Ratio
1718-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 1.8 Inch (45.7mm) diameter Propellers.
Availible in three different pitches.
 
1814-10-50(2) CLL 1.4 Pitch Ratio
1816-10-50(2) CLL 1.6 Pitch Ratio
1818-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 1.9 Inch (48.3mm) diameter Propellers.
Availible in three different pitches.
 
1914-10-50(2) CLL 1.4 Pitch Ratio
1916-10-50(2) CLL 1.6 Pitch Ratio
1918-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 2.0 Inch (50.8mm) diameter Propellers.
Availible in three different pitches.
 
2014-10-50(2) CLL 1.4 Pitch Ratio
2016-10-50(2) CLL 1.6 Pitch Ratio
2018-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 2.1 Inch (53.3mm) diameter Propellers.
Availible in three different pitches.
 
2114-10-50(2) CLL 1.4 Pitch Ratio
2116-10-50(2) CLL 1.6 Pitch Ratio
2118-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 2.2 Inch (55.9mm) diameter Propellers.
Availible in three different pitches.
 
2214-10-50(2) CLL 1.4 Pitch Ratio
2216-10-50(2) CLL 1.6 Pitch Ratio
2218-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 2.3 Inch (58.4mm) diameter Propellers.
Availibe in three different pitches.
 
2314-10-50(2) CLL 1.4 Pitch Ratio
2316-10-50(2) CLL 1.6 Pitch Ratio
2318-10-50(2) CLL 1.8 Pitch Ratio

Click picture for more details.

ABC 2.4 Inch (60.96mm) diameter Propellers.
Availibe in three different pitches.
 
2414-10-50(2) CLL 1.4 Total Pitch 85.34mm (3.65")
2416-10-50(2) CLL 1.6 Total Pitch 97.53mm (3.84")
2418-10-50(2) CLL 1.8 Total Pitch 109.72mm (4.32")

Click picture for more details.

ABC 2.5 Inch (63.5mm) diameter Propellers.
Availibe in three different pitches.
 
2514-10-50(2) CLL 1.4 Total Pitch 88.90mm (3.50")
2516-10-50(2) CLL 1.6 Total Pitch 101.6mm (4.00")
2518-10-50(2) CLL 1.8 Total Pitch 114.3mm (4.50")

Click picture for more details.

ABC 2.6 Inch (66.4mm) diameter Propellers.
Availibe in three different pitches.
 
2614-10-50(2) CLL 1.4 Total Pitch 92.46mm (3.64")
2616-10-50(2) CLL 1.6 Total Pitch 105.66mm (4.16")
2618-10-50(2) CLL 1.8 Total Pitch 118.87mm (4.68")

ABC S-15 Propeller.
49mm (1.95") diameter propeller.

Pitch 84mm (3.30")

Fits 3/16" Prop Shafts

ABC S-20 Propeller.
55mm (2.15") diameter propeller.

Pitch 95mm (3.75")

Fits 3/16" Prop Shafts

The beauty of this antenna tube is the clean looks and ease of installation.

Just drill one simple 1/4" hole, tighten the included hex nut and your done!

The tube measures 12-13"

This aluminum bracket mount will allow you to mount your Bru Line or similar antenna on the transom of your boat.
 
The picture shows the mount with a BruLine antenna attached to it on the left and just the mount on the right. This part doesn't come with the antenna!

1/8" Thrust Bearing.
Three piece set. (2) washers and center ballbearing section.

(2) flanged bearings for stuffing tube.
(2) flanged bearings for outdrive.
 

Note: Bearings must be dried and oiled after use.

This bearing will reduce motor heat by removing the pressure from the rear motor housing bearing in a brushed or brushless motor. 
 
This will fit most motors with a 6mm output shaft, including the KB Motor Series.

Measures:
6mm id x 14mm od x 5mm wide

This bearing will reduce motor heat by removing the pressure from the rear motor housing bearing in a brushed or brushless motor. 
 
This will fit most motors with a 8mm output shaft, including the KB Motor Series.

Measures:
8mm id x 16mm od x 5mm wide

These are the stock rubber replacement boots for the steering linkage on Cen Racing Boats.

(2) per pack.

This  stringer mounted aluminum motor mount will fit either a 500, 600 or 700 size motor. The bolt pattern is 1" or 1 1/8" inch, so it will also fit lots of popular brushless motors.  The major benefit to a mount like this in a Deep Vee Style boat is it allows the motor to be mounted very low in the "Vee"

Includes:
Aluminum mount only

Requires:
All screws or mounting hardware

Hatch only.

Requires decals, velcro and drivers heads.

4mm Thrust Bearing.

Placed between your coupler and your motor, this will slow down the bearing wear in your motor.

This includes (1) Cen Racing Mirage receiver. No crystals!

Rubycon Low ESR Capacitor

Good for use with up to 6s esc's. See forum for install and applications.
Rubycon part number: 35ZLH1000M12.5X20

Specs:
Rated Voltage: 35v   Rated Capacitance: 1000uF
Capacitance Tolerance: 20%
Temperature Range: -40 to 105C
Rated Ripple Current: 2480
12.5mm diameter x 20mm height

WARNING: If any capacitors seem to bulge, start to deform, leak or pop, stop using them IMMEDIATELY!!! If Capacitors fail they can explode and cause injury.

It is generally reported that capacitor failures can be attributed to:
1) Heating, causing a capacitor to swell and explode.
2) Drying of the liquid electrolytic inside from various causes, such as defects, leaking and even cleaning.
3) Capacitors re-form over time to meet a usual and expected voltage. Surges that are not normal can cause sudden failure.
4) The older they get the greater the incidence of failure.
5)High-current motor setup will tend to kill the caps quickly (because of the large voltage changes).

This is a great product to help fight corrosion on your electronic equipment like radio receivers, esc's and servos. It can be used after electronics get wet by displacing water or protecting electronics from future water damage.

CAN NOT BE SHIPPED OVERSEAS!

6 Ounce Aerosol Can.
 

Large size linkage rod boots.

These heavy duty linkage boots will help stop water from seeping in around your steering linkage or wiring exiting the hull.
Give a full inch of movement and will accept either 2-56 or 4-40 pushrods.

Approx: 55mm long.
These come 2 boots to a pack.

Click picture for more details.

This is the Receiver Box that comes standard on the Traxxas Stampede, Rustler, and Bandit Vehicles. This is perfect for use in rc electric boating applications. Easy to install.

FEATURES: Nylon construction Black in color

Click picture for more info.

Almost ready to run Outlaw Jr Off Shore Deep Vee from Thunder Tiger. This is the 2.4GHz radio controlled with brushless electric motor and speed control.

ABS blow molded with magnetically attached hatch.
Flip up Rudder.
Motor: Outrunner brushless 29/20-15M, water cooled
Radio: Ace Cougar P2 2.4GHz two-channel with steering and throttle trim, changeable receiver module, 10 model memory and mini steering servo.
ESC: Thunder Tiger BLC-40M with Deans connector
Stand: Plywood

Comes in either Yellow or Green

This bearing will reduce motor heat by removing the pressure from the rear motor housing bearing in a brushed or brushless motor. 
 
This will fit most motors with a 5mm output shaft, including the Feigao, Nemesis, AquaCraft SuperVee and 700 motors with 5mm shafts.

Click picture for more info.

NOW Includes Castle Creations 36mm Brushless Multi Pole Motor and Castle Creations Speed Control!

Spartan Deep V Racing Boat from Traxxas with Traxxas 2.4GHz remote control system. Brushless motor technology brings this boat to close to 50MPH!*

INCLUDES:
Traxxas Spartan Deep V Racing Boat, 2.4GHz radio, brushless motor, ESC, two 7-cell batteries and instructions

SPECS:
Hull Length: 36.5" (927mm)
Overall Length: 40.8" (1037mm)
Beam (Width): 9.5" (243mm)
Weight: 72oz (2041g)
Dead Rise Angle: 26°
Input Voltage: 7-18 NiMH Cells, 2-6 LiPo Cells (8.4V-22.2V DC)

REQUIRES:
AA Cells: Four for transmitter
Battery Charger: NiMH compatible with charging 7cell Nimh Sub c Cells.
Make sure that charger has "Traxxas High Current Connectors" installed or an adapter.

9" (228mm) Long Velcro Battery Straps.

Black color, 4 Straps per pack velcro strap

SPECS:
Length: 9" (228mm)
Width: .62" (16mm)

Velcro style straps can be used to hold down battery packs,

(2) per pack.

Measure approximately 13" (350mm) long x .75" (20mm).

Click for more info, specs and video.

This RTR has all the extras — and no equals!
There’s never been a LiPo-ready hydro with brushless power and 2.4GHz technology — until now. The UL-1 Superior has been designed in the U.S.A. to deliver today’s best in cutting-edge control, brushless performance and competition-quality features!

Features high-performance GrimRacer hardware. Brushless marine motor and ESC custom-designed to meet UL-1 performance requirements. Drive system uses a standard 0.150" flex drive and 3/16" prop shaft to provide race-quality response and reliability. Ideal for IMPBA and NAMBA FE Sport Hydroplane Class events.

Click picture for more details & video.

Minimono Boat from AquaCraft brushless electric powered, 2.4GHz radio controlled, ready to run

FEATURES:

Hull: Molded plastic
Motor: 28-30-2200kV brushless Radio.
Radio: Tactic 2.4GHz Electronic Speed Control.
Battery: 20A LiPo compatible.
Rudder: Breakaway design that allows rudder to swing back if it strikes an object and then return to correct position
Stand: Molded plastic

INCLUDES: Aquacraft Minimono Boat with Stand, Motor, Radio, ESC, and Instructions

SuperVee 27 Fiberglass Cowl / Hatch with painted windshield.

Hatch lock not included:

Click Picture for more info.

AquaCraft Motley Crew Off-Shore FE Catamaran Boat 2.4GH

Durable fiberglass is the only material worthy of the Motley Crew's aggressively-styled catamaran hull.

The rudder and strut are genuine GrimRacer™ parts, made of machined aluminum for consistent performance and durability...and black anodized for sharp looks.
 
The trim scheme is an officially licensed reproduction of that found on the full-size world champion racer!

Underneath the hatch is ample space for the fully integrated power system and two powerful LiPo battery packs* — and all arranged efficiently inside this unique tub. *Batteries not included. The 60amp water cooled esc and 6-pole 1800kV brushless motor delivers plenty of power, and features a water jacket that keeps running temps down to extend motor life.

New for the summer of 2010, is the AquaCraft SuperVee 27R.
This boat replaces the SuperVee 27. New is an upgraded 1800kv motor and now includes two turn fins for left and right turning.
The AquaCraft SuperVee 27R includes many GrimRacer accessories such as Machined Aluminum Surface Drive Strut Assembly, Adjustable Anodized Rudder, Stainless Steel Trim Tab Plates, Aluminum Adjustable Turn Fin Assembly, Stainless Steel and Spring Steel Cowl Lock System. With speeds in the 30-35mph range, this is the first mass-produced RTR electric boat of its kind! This is not a toy!

SuperVee 27 Rudder Blade. This part can be used on any boat when combined with rudder bracket part# aqub7889

Stock Replacement Strut Bushing for AquaCraft SuperVee 27, SuperVee 27R & AquaCraft UL-1

Click picture for more details.

This is the Motor Mount for the AquaCraft SuperVee 27 Brushless.

Stock replacement propellers for the AquaCraft UL-1 and SuperVee 27 Electric Boats.

Carbon reinforced 40mm 3 blade prop. Fits 3/16" prop shaft

This prop is very similar in blade shape and design to a Octura x440/3. But does not require balancing and sharpening.

(2) per pack

Flex Cable Grease:

This water resistant grease stays on the cable better than most oils to help keep things lubricated throughout your entire run. This 2 ounce bottle will last a few hundred runs. 

Stock replacement water jacket for SuperVee 27
Fits 36mm diameter motor. 25mm wide. 

GrimRacer Metal Prop
36mm Diameter x 55mm Pitch
2 Blade Propeller for 1/8" prop shafts.

Can be used as a Upgrade for Miss Vegas.
Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
40mm Diameter x 53mm Pitch
2 Blade Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
40mm Diameter x 52mm Pitch
3 Blade Propeller for 3/16" prop shafts.

Can be used as a upgrade prop for Super Vee.
Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop.
42mm Diameter x 55mm Pitch
2 Blade Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

GrimRacer Metal Prop
38mm Diamter x 55mm Pitch
2 Blade Lifter Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
38mm Diamter x 63mm Pitch
2 Blade Lifter Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop, Lifter Style for Hydros
40mm Diameter x 57mm Pitch
3 Blade Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
42mm Diamter x 66mm Pitch
2 Blade Lifter Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
44mm Diameter x 66mm Pitch
2 Blade Lifter Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop
45mm Diameter x 68mm Pitch
2 Blade Lifter Propeller for 3/16" prop shafts.

Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.

GrimRacer Metal Prop 
65mm Diameter x 100mm Pitch
2 Blade Propeller for 1/4" prop shafts.

Fits most 23cc - 28cc gasoline powered boats.
Made of a mix of Copper, Beryllium & Titanium!

Tumbled to produce a bright finish.
 

Capacitors are for use on electric motors when used in conjunction with electronic speed controls.  The capacitors help filter out the 'electronic' noise.
(3) Caps needed per motor.

This fits the male tamiya connector on a charger and converts it to charge the Deans Ultra connector on the battery pack. This is a good item to use if you don't want to void the warrantee of your charger by cutting the tamiya connector off and altering the charger.

Connects two batteries w/ Deans Ultra Female connectors in Parallel to an ESC with a Deans Ultra Male connector.

4mm Banana Plus with deans male ultra plug on the end. Great for charging packs with Triton, Ice chargers or any charger that requires a 4mm banana plug. 10a max rating.

Pro Boat Marine Grease Gun allows boaters to apply grease easily and neatly to their models’ moving parts. Pro Boat’s waterproof  Marine Grease adheres to most surfaces. Grease Gun w/ Marine Grease 5 oz.

3/16"(.187) Cable with 3/16" propeller shaft.

From end to end the entire unit measures 11.5". The Prop shaft is 3.75" long.

This is the upgrade replacement part for the ProBoat Shockave 36 & ProBoat Thunder Cat but can but used with other boats.

Required:
Drive Dog, We suggest oct-oc6dm for the Shockwave and Thundercat.

Click picture for more info.

The ProBoat Mystic Catamaran.

Same great hull as the ProBoat Miss Geico but with some added upgrades for racing. Upgraded 1800kv Motor. Offset rudder system and Stainless Steel Prop.

It accepts two 2S Li-Po packs or two 7.4V Ni-MH/Ni-Cd packs with Deans connectors for extreme run times and insane top speeds.

Comes with or Without Radio System.

Click picture for more info.

Combining 2.4GHz Spektrum technology, brushless power and stunning looks, Pro Boat’s fully licensed Miss Geico 29 Brushless Catamaran will impress even the most seasoned RC boat enthusiast. It accepts two 2S Li-Po packs or two 7.4V Ni-MH/Ni-Cd packs with Deans connectors for extreme run times and insane top speeds. As a must for anyone looking for great looks and flawless performance.

ProBoat Miss Geico Painted Canopy.


NOTICE FOR ORDERS OUTSIDE THE USA! This item can NOT be shipped by Priority Shipping. It can only be shipped by Expressmail! Any order that contains this item and does not select shipping by Expressmail, will have this item removed, refunded and the other items shipped without notice.

ProBoat Miss Geico Radio Box Cover

MG29

NOTICE FOR ORDERS OUTSIDE THE USA! This item can NOT be shipped by Priority Shipping. It can only be shipped by Expressmail! Any order that contains this item and does not select shipping by Expressmail, will have this item removed, refunded and the other items shipped without notice.

The is the stock decal set for the ProBoat Miss Geico.

Click picture for more info.

Impulse 26 Deep-V EP RTR

The Pro Boat Impulse 26 Deep-V EP RTR combines impressive styling and affordability with the performance of higher priced models. Without a doubt, this boat provides better handling and performance than its competitors. How can you be sure? Easy—it gives you more for your money. It features a Pro Boat 2.4GHz radio system, water-tight electronics compartment and an ESC with reverse. Better still, the Impulse comes Ni-MH-ready and uses a brushed power plant to propel it through the water. Get more for less. Get the Impulse 26.

Click picture for more info.

Impulse 31 Deep-V BL RTR

Race-ready out of the box, the Impulse™ 31 Deep-V BL RTR represents the ultimate in performance and quality. It combines a competition-ready fiberglass hull with performance features generally found in higher priced models. You won’t be able to get enough of the extreme speeds. Thanks to the 1800Kv brushless powerplant, the Impulse tears across the water at speeds that won’t disappoint. This Deep-V isn’t afraid of corners either—the race-designed fiberglass hull keeps the Impulse glued to the water. At the same time, the offset rudder and race-style running gear help it plow through turns at incredibly fast speeds. And it does all this while maintaining precise control even in the roughest of water conditions.

Impulse 31 Hatch.


NOTICE FOR ORDERS OUTSIDE THE USA! This item can NOT be shipped by Priority Shipping. It can only be shipped by Expressmail! Any order that contains this item and does not select shipping by Expressmail, will have this item removed, refunded and the other items shipped without notice.

ProBoat Impulse 31 Dual Rudder System.

This system includes a rudder and bracket to turn your stock single rudder to a dual rudder system.

Comes with brackets and (1)rudder.

Impulse 31 Canopy Sealer.

NOTICE FOR ORDERS OUTSIDE THE USA! This item can NOT be shipped by Priority Shipping. It can only be shipped by Expressmail! Any order that contains this item and does not select shipping by Expressmail, will have this item removed, refunded and the other items shipped without notice.

Standard Size for most applications with
one preinstalled "+"style servo horn.

Etti adjustable motor mount for 380 to 480 sized Motors with 19mm motor mounting holes!

Fully adjustable in height and motor shaft angle, makes this one of the easiest mounts to align perfectly with your drive shaft.

The mounting plate can be flipped over so it can be mounted deep into a monos deep vee or on a flat surface like a catamaran or hydro.

Motor plate is anodized blue, Brackets are black fiberglass.

Applications:
Fits 380 to 480 sized Motors with 19mm motor mounting holes!

Etti adjustable motor mount for 500  to 600 size motors with 25mm motor hole spacing.

Fully adjustable in height and motor shaft angle, makes this one of the easiest mounts to align perfectly with your drive shaft.

The mounting plate can be flipped over so it can be mounted deep into a monos deep vee or on a flat surface like a catamaran or hydro.

Space between mounting stands is 56mm.

Motor plate is anodized blue, Brackets are black fiberglass.

Applications:
Fits most 540, 550, 600 motors.
Feigao & Nemesis 540, Hacker B50, B50L & B50xl.
Neu motors with 25mm mounting hole spacing, like the 1506, 1509, 1512, 1515 series.
Aqua SuperVee motor.
Ammo 2300 Motor.

Fits most motors that use a 25mm mounting hole spacing.

Etti adjustable motor mount for 380 inrunner or outrunner motors with 25mm motor screw spacing.

Requires:
Motor screws. Mounting of the unit in the hull. And gluing of the water inlet and outlet in the desired position.

Why top your beautiful new Rc boat or truck with an inexpensive plastic antenna tube. This custom antenna will help extend the range of your radio by staying up straighter during your run and at the same time give your vehicle that slick custom look! The built in coil at the base makes this antenna very flexible, so its able to endure, roll over after roll over in 4x4 vehicles!

They are black in color.

This high strength composite motor mount will fit either a 500, 600 or 700 brushed motor, Feigao 540 motors. Making it a very versatile mount. The bolt pattern is 1" or 1 1/8" inch, so it will also fit lots of popular brushless motors. 

Attention:
A 700 motor will not fit with a cooling coil installed on it.
A Feigao 540 brushless motor will fit with a pn#ose-mjacket cooling jacket installed.

Diameter 30mm Pitch 1.4x30=42mm 

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 33mm, Pitch 1.4x33=46mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 36mm, Pitch 1.4x36=50mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 39mm, Pitch 1.4x42=67mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 42mm, Pitch 1.4x42=67mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 40mm(1.58"), Pitch 1.4x40=56mm or 2.20"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 40L mm(1.57"), Pitch 1.4x40=56mm or 2.20"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 42mm(1.65"), Pitch 1.4x42=58mm or 2.31"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 45mm(1.77"), Pitch 1.45x45=63mm or 2.48"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 45L mm(1.77"),Pitch 1.4x45= 63mm or 2.48"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 48mm(1.89"), Pitch 1.4x48=67mm or 2.64"

These Props are light, sharp and don't need to be balanced or sharpened!  Fit 3/16" shafts w/drive dogs.

Diameter 51mm(2.01"), Pitch 1.4x51=71 mm or 2.80"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 51L mm(2.01"), Pitch 1.4x51=71mm or 2.80"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 54mm(2.13"), Pitch 1.4x54=75.6mm or 2.98"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 57mm (2.24"), Pitch 1.4x57=79.8mm or 3.14"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 57L mm(2.24"), Pitch 1.4x57=79.8mm or 3.14"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 60mm(2.36"), Pitch 1.4x60=84mm or 3.31"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 63 mm (2.48"), Pitch 1.4x63=88.2mm or 3.47"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 63L mm(2.76"),Pitch 1.4x63=88.2mm or 3.47"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 3/16" shafts w/drive dogs.

Diameter 70mm(2.76"), Pitch 1.4x70=98mm or 3.86"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. 

Fit 1/4" shafts w/drive dogs.

Diameter 70L mm(2.76"), Pitch 1.4x70=98mm or 3.86"

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. 

Fit 1/4" shafts w/drive dogs.

Diameter 26mm for 2mm threaded shaft, Pitch 36mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 2mm threaded shafts.

Diameter 29mm, Pitch 40mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 31mm, Pitch 40mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 31mm L, Pitch 43mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 4mm threaded shafts.

Diameter 33mm, Pitch 46mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 34.5mm, Pitch 48mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 36mm, Pitch 50mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 36mm L, Pitch 50mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 4mm threaded shafts.

Diameter 37.5mm, Pitch 52mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 39mm, Pitch 54mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 39 mm L, Pitch 54mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 4mm reversed threaded shafts.

Diameter 40.5, Pitch 56mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 42mm, Pitch 58mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 42mm L, Pitch 58mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin clockwise. Fit 4mm reversed threaded shafts.

Diameter 43.5mm, Pitch 60mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Diameter 45mm, Pitch 63mm.

These Props are light, sharp and don't need to be balanced or sharpened! Looking at the transom, these props spin counter clockwise. Fit 4mm threaded shafts.

Now you can use American 3/16" Drive-Dog Style Props on 4mm threaded boat shafts or Graupner's Race Boat Drives.

This Drive Dog screws onto the standard European 4mm threaded boat shafts. This allows you to use standard USA 3/16' drive dog type boat props on the 4mm European threaded shafts.

Includes (1) 4mm threaded drive dog.

Requires:
Prop nut
4mm to 3/16 sleeve  ose-1030