AquaCraft Motley Crew and Lucas Oil Airfoil by Hug Racing

This quick install will help reduce blow-over, increase top speed and handling.

Click here for a review done by a OSE Forum member.

Click picture for more details.

AquaCraft UL-1 Airfoil by Hug Racing

This quick install will help reduce blow-over, increase top speed and handling.

ULTRAPOWER UP120AC 110V/ 220V AC Input /DUO CH1 120W, CH2 100W AC/DC 10.0A Multi Charger/ Discharger UP120AC

Input voltage AC 100-240V, DC 11.0-18.0V
Charge/Discharge Power: Max. 120W/10W (CH1);  Max. 100W/10W (CH2)
Charge/Discharge Current: 0.1-10.0A/0.1-5.0A
Balance Current: 300mA/cell
LiIo/LiPo/LiFe cell count: 1-6 series
NiCd/NiMH battery cell count: 1 - 15cells
Pb battery voltage: 2V-20V (1-10cells)
Battery data memory: up to 10 data
Weight: 1.2kg
Dimension: 180x139x60mm

Requires:
Battery plug soldered to charge lead.

Click picture for more details.

Traxxas built the Spartan with a 5mm propeller shaft. This limits the availability of cables and shafts.

We built this strut in the standard 3/16" size and included two lead teflon bushings (part# oc6ltsb) for added prop shaft support. Then added a oiler/grease fitting for ease of maintenance. This strut is an absolute must for the customers running modified motors with the Spartans. This strut used in conjunction with the OSE-1190 cable and ose-81518 coupler will make a much stronger system.

These are available Silver or Blue anodized metal. 

Aluminum cnc thru hull water pickup fitting.

This water fitting is designed to be installed flush into the floor of your hull, reducing drag. It allows the constant flow of water that your boat is riding on to travel up and into your water system.

Click picture for details.

OSE Traxxas Spartan High Power Cable System Upgrade.

-Upgrade your Traxxas Spartan to a much stronger 3/16" (.187", 4.75mm) cable and shaft system.
-Works in the stock Traxxas Stuffing tube.

Traxxas built the Spartan with a 5mm propeller shaft and .150 cable. This limits the power you can use. Most increases in power cause the scock cables to twist and break.

We built this strut in standard 3/16" size and included two lead Teflon bushings (part# oc6ltsb) for added prop shaft support. Then added a oiler/grease fitting for ease of maintenance. This strut is an absolute must for the customers running modified motors with the Spartans. This strut used in conjunction with the OSE-Spartan-Cable and ose-81518 coupler makes a much stronger drive system.

Click picture for more info.

RTI (ready to install) 4082 Leopard Motor and Seaking V3 Esc combo by OSE.
 
This plug and play power system is meant for a boat that requires 2000-2500 watts of power in the 4-6 pound area. We have done all the hard work, soldering and installing the parts for top performance.

Offered in the following kv ratings.

Ose motor and esc upgrade for Traxxas Spartan.

RTI (ready to install) Motor and Esc combo by OffshoreElectrics.
This system will run faster than the stock Traxxas Spartan system, while remaining cooler and have much reliability. We have done all the hard work, soldering and installing the parts for top performance.

System Includes:
Leopard 4082 Motor 1600kv.
Seaking 180 Version 3 Esc.
Water Jacket.
5 Extra OSE 6.0 mm bullet connectors for your batteries (5 Male & 5 Female). Enough for 2 sets of battery packs and a set for your charger.
OSE 6.0mm bullet connectors installed on the esc and motor.
All connectors and water jacket installed. All included items are in the picture.
3' of 1/4" Silicone tubing

Requires:
(2) 3s 45c 5000mah Lipo packs.
You to solder the included connectors to your Lipo packs.

Click picture for HD video & more info.

ProBoat React™ 9 Self-Righting Brushed Deep-V RTR

Take to the water with the compact and convenient Pro Boat^® React^™ 9 Deep-V, a dynamic self-righting 9-inch Deep-V that will never leave you "up a creek without a paddle". This intuitive RTR comes out of the box equipped with impressive features that give you the edge over the competition. Thanks to a potent 180 size brushed motor under its canopy, the React 9 makes it easy to overpower your competition with speeds in excess of 12.5+ MPH. In the event you push the boat past its limit and go belly up, getting the React 9 back to a race-ready position is as simple as "rocking the boat" by hammering the throttle backward and forward.

Requires:

Nothing!!! Comes with everything needed.

Flex cable saver for .150 or .187 diameter cable. This can be used to stop the flex cable from coming out of your boat if the coupler comes loose.

Made of cnc cut aluminum for light weight. Less than 2 grams! Anodized in silver with a 3mm grub screw.

Measures: 12.5mm OD,  5.5mm wide.
Requires: 2.0 mm allen driver.

Install note: Install this item as close to the coupler as possible. In our picture we spaced it for display purposes only, so it was easy to see. Do not over tighten.

Note: Flex cable and coupler in picture for demonstration purpose. Not included.
 

Great Planes Cut-Off wheels are for use with a Dremel tool or the like.

Features:
Large cutting edge for slotting and cutting. Fiberglass reinforced to help prevent breakage during use, adding saftey and strength.

Includes:
(1) cut-off wheel
(1) mandrel

Requires:
This requires a Dremel tool or similar product.

Specs:
Cut-off wheel diameter: 1-1/4"
Thickness: 1/32"
Mandrels shank diameter: 1/8"

NOTE:
Users and by-standers must wear safety glasses when using this product. This product is not to be used in excess of 28,000 rpm.

Great Planes Cut-Off wheels are for use with a Dremel tool or the like.

Features:
Large cutting edge for slotting and cutting. Fiberglass reinforced to help prevent breakage during use, adding saftey and strength.

Includes:
Two cut-off wheels in a reusable plastic parts pack.

Requires:
The cut-off wheels require a mandrel (GPMR8200) and a Dremel tool.

Specs:
Diameter: 1-1/4" diameter
Mounting hole: 1/8"

COMMENTS
Users and by-standers MUST wear safety glasses when using this product. This product is not to be used in excess of 28,000 rpm.

Click picture for full specs.

Hifei Swordfish Pro 120 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Programing can be done with your transmitter, optional program card or optional USB adapter or optional LCD Program Box/Handheld Unit.

120 Amps, 2s to 6s LiPo cells.
Built in BEC(Battery eliminator circuit)

Keep your most-frequently used tools at your fingertips with the 12-in-1 Wrench Set from Kinexsis. Designed with most RC enthusiasts in mind this set contains the most-common hex and screwdriver sizes designed to lock into the included aluminum handle.

Includes:

.050”, 1/16”, 5/64”, 3/32” SAE hex tips
1.5mm, 2.0mm, 2.5mm and 3.0mm Metric hex tips
1.5mm slotted, 2.5mm slotted,
00 Phillips and 0 Phillips tip

Click picture for more details.

TFL Cheetah fiberglass catamaran in white gelcoat.
It can be powered with 4s to 6s Lipo
Speeds up to 70mph

Specs:
Length: 34.00" (864mm)
Width: 13.50" (343mm) at widest point.
Weighs: 3.5 lb empty

White gelcoat (picture shows as painted for an example)

10 in 1 Rc Tool kit
A great addition to the tool box. High grade tool steel with rubber coated handles for comfort. Precision sized allen drivers and screw drivers for non slip.

Kit Includes:

Wire cutters
Needle nose pliers
Ball link pliers
1.5mm, 2.0mm, 2.5mm Metric hex tips
#1 slotted screw driver
#0 Phillips screw driver
4.0, 5.5mm Metric Nut Drivers
 

Needle nose pliers with rubber grips.
 

Wire cutters with rubber grips.

Hot Racing aluminum adjustable trim tabs for the Traxxas DCB M41 boats

Features:
- Adjusts angle of trim tab assembly for proper hull planing
- CNC machined aluminum construction
- Pre-drilled for mounting
- Anodized blue for durability, corrosion resistance, and great looks

Includes:
- Two (2) adjustable trim tabs S

Specs:
- Weight: 0.78oz
- Length: 33mm (1.30 inch)
- Width: 30mm (1.18 inch)
- Height: 24.5mm (.96 inch)

Note:
- Use the stock 4x12mm screws to mount

Aluminum 36mm Water Cooling Jacket - M41

Hot Racing 36mm aluminum
-Full coverage water cooling jacket for the Traxxas M41 and Spartan boats

Features:
- CNC machined billet aluminum construction
- Full coverage and machined cooling fins for increased heat transfer
- O-ring seals for leak mitigation
- Black anodized finish for durability, corrosion resistance, and great looks
- Secondary processed machining exposes aluminum for enhanced aesthetics
- Installs on Traxxas 36mm marine motor

Includes:
(1) aluminum cooling jacket

Specs:
- length: 63mm (2.5 inch)
- Inner diameter: 36mm (1.4 inch)
- Outer diameter:51mm (2.04 inch)
- Weight: 3.2oz

Note:
- Replaces Traxxas factory TRA5760 rubber water cooling jacket

Hot Racing aluminum dual 5mm bearing drive strut for the stock prop shaft on the Traxxas DCB M41 Race Boat.

Features:
- Pre-installed dual stainless steel ball bearings
- 5mm ID bearings are compatible with the stock prop shaft
- CNC machined aluminum construction
- Anodized blue in color

Includes:
(1) drive strut

Requires:
- Installation onto boat

Specs:
Bearings: 5x10x4mm

Note"
Works with stock Traxxas 5729 flex shaft

The Hyperion G5 LiPo packs are made with a new Hybrid RS construction technology, super-fine substrate materials, rigorous ISO 9001 Quality Control, and final cell matching process, which all guarantee you not only this superb performance, but also tightly balanced and long-lasting packs.

The G5 LiPo series is perfect for all applications that need the high voltage maintained at high discharge rates.

Specifications:

• Capacity: 2500mah
• Voltage: 3S, 11.1v nominal
• Discharge Rate: 50Cmax (50C burst, 25~30C continuous)
• Charge Rate: 6C maximum, 5C recommended
• Weight: 205 grams
• Dimensions: 105.5 x 34.1 x 26.8mm
• Power Connector: XT-60
• Balance Connector: JST-XH

CMax = Continuous C-Rate for 100% rated capacity delivery is 1/2 C-Max rate.

Water jacket for Traxxas 36mm Motor. Fits Traxxas DCB M41 Boats

This Aluminum water jacket is longer than the stock silicon jacket and uses larger inside passage ways for added water volume circulating around the motor. Which translates into better cooling. Both the water inlet and outlet are adjustable water fittings for optimal fit.

Specs:
Measures 2.44"(62mm) long and 1.55"(39.3mm) Outside diameter.

Note: Fits Traxxas DCB M41 36mm Motors, Also 3674 Leopard Motors.

Water jacket for Traxxas 36mm Motor. Fits Traxxas Spartan.

This Aluminum water jacket is longer than the stock silicon jacket and uses larger inside passage ways for added water volume circulating around the motor. Which translates into better cooling. Both the water inlet and outlet are adjustable water fittings for optimal fit.

Specs:
Measures 2.44"(62mm) long and 1.55"(39.3mm) Outside diameter.

Note: Fits Traxxas Spartan and DCB M41 36mm Motors, Also 3674 Leopard Motors.

Click picture for full specs.

Hifei Swordfish Pro 200 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Programming can be done with your transmitter, optional program card or optional USB adapter or optional LCD Program Box/Handheld Unit.

200 Amps, 4s to 8s LiPo Cells
NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit.

Keep your most-frequently used tools at your fingertips with the Ultimate Air/Surface Startup Tool Set from Kinexsis. Designed with most RC enthusiasts in mind this set contains the most-common nut drivers, hex wrenches and screwdriver sizes designed to lock into the included aluminum handle. You won’t find a more comprehensive tool set out there. And to help you easily transport and protect your tools, we’ve included a convenient, durable pouch.

Includes
.050”, 1/16”, 5/64”, 3/32” SAE hex tips
1.5mm, 2.0mm, 2.5mm and 3.0mm Metric hex tips
1.5mm slotted, 2.5mm slotted,
00 Phillips and 0 Phillips tips
3/16”, 1/4”, 5/16”, 3/8" SAE Nut Drivers
5mm,5.5mm, 7mm and 8mm Metric Nut Drivers
3mm, 4mm, 5mm, 5.5mm, 6mm, 7mm, 10mm, 3/16”, 1/4”, 5/16” and 11/32” Box Wrenches

OSE designed dual pickup rudder blade for Traxxas DCB M41 Catamaran.

We designed this with the Offshore rc boat racer and sport boater in mind. Normally most dual pickup rudders have both water inlets/pickups on one side of the blade, limiting the water when you turn in the opposite direction of the pickups. We put a inlet/pickup on both sides of the blade, so the water will flow in both left and right turns.

Includes:
(1) rudder blade, See picture 1

Specs:
Blue anodized aluminum

Requires:
1/4" tubing pn# ose-tubing-1/4-clear

Note:
Fits Traxxas DCB M41
Picture 2 and 3 are for display purposes, this does NOT come with a boat.
 

REVO Graphene Oxide GoPACKS:
There is a new #1 in town with the lowest internal resistance(IR) in Lipo history. 70C Discharge and 4.2 volts per cell. For high power draw and long cycle life.

Specification:

- Capacity: 5000mAh
- Max Continuous Discharge: 70C Continuous
- Max Burst Discharge: 140C
- Charge Voltage 4.2volts per cell.
- Supplied with Revolectrix BUMP Compliant NFC tag
- 10 Gauge wire
- Side Protection
- Voltage available: 2S 7.4 to 6S 22.2V
- Balance Plug: JST-XH
- Discharge Plug: Not included
- Charge Rate: 1-3C Recommended

TFL Genesis Carbon-fiber catamaran in ECF finish (exposed carbon fiber). Which gives it that sharp looking carbon fiber look with the added benefits of lower weight and higher strength.

It can be powered with 3s or 6s Lipo

Speeds up to 70mph

Boat Specs:
Hull length, 37.00" (950mm)
Hull width, 9.75" (250mm)
Weighs approx: 2.75 lb empty
 

TFL Genesis Fiberglass catamaran in painted blue and wite design.

It can be powered with 3s or 6s Lipo

Speeds up to 70mph

Boat Specs:
Hull length, 37.00" (950mm)
Hull width, 9.75" (250mm)
Weighs approx: 3.5 lb empty
 

Click picture for more details.

TFL Cheetah Carbon-fiber catamaran in ECF finish (exposed carbon fiber). Which gives it that sharp looking carbon fiber look with the added benefits of lower weight and higher strength.

It can be powered with 4s or 6s Lipo

Speeds up to 70mph

Specs:
Length: 34.00" (864mm)
Width: 13.50" (343mm) at widest point.
Weighs: 3.00 lb empty
 

TFL 41" (1040mm) Zonda Rc Boat, Catamaran with Twin Drives.

If you are looking for a extremely fast and well built fast electric boat, you found the right one. This boat comes assembled with all high quality equipment. 

Some of the major components include,
Fiberglass hull with layer of Kevlar for extra strength.
Two Seaking 120 esc's for reliable performance and waterproof.
Two TFL SSS 3674 2075 KV Brushless Motors Adjustable twin struts
Metal left and right counter rotating propellers.

ARTR(almost ready to run). It requires a servo, 2 channel radio and batteries

Requires:
Steering Servo
2 Channel Radio System
(2) 4s or 5s 45c 5000 MAH Lipo packs and charger

Click picture for full specs.

Hifei Swordfish Pro 220 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Programming can be done with your transmitter, optional program card or optional USB adapter or optional LCD Program Box/Handheld Unit.

220 Amps, 2s to 6s LiPo Cells.
Built in BEC(Battery eliminator circuit)

Reaction Lipo Pack - 2s 50C (7.4V) 5000mah

The Heavy Duty Reaction LiPo Battery packs from Dynamite represent awesome quality and value that provide the power and performance for the everyday RC enthusiast. These HD 50C packs were specially designed to provide the needed power applications that require a little higher demand like RC Boats and 1/5 and 1/6-scale vehicles.

Features:
Heavy Duty, performance-driven 50C discharge rating
3C charge rating for quick, safe recharging.
High capacity – 5000mAh
Prewired with popular, high power female EC5 connector
Hard casing provides increased durability and reliability XH balance adapters.

NOTICE FOR ORDERS OUTSIDE THE USA! The US Post Office has restricted Lithium packs from shipping. We can no longer ship these outside the USA! Sorry for this!!

 

Click picture for more detail.
Leopard 2850 X2 Motor.

28mm Diameter by 50mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 85%. Comes with high quality bearings and neodymium magnets for high power. Vent cutouts in the front and rear endbells allow air to circulate for additional cooling.

Available in two versions.
3330 Kv/rpm per volt 4D
5300 Kv/rpm per volt 2.5D
 

TFL Pursuit with Integrated Drive System : ARTR

TFL fiberglass Pursuit . This boat comes assembled with all high quality equipment including cnc aluminum hardware and new TFL Intergrated drive system.

Includes:
-Fiberglass hull for light weight and high strength.
-Seaking 120amp esc for reliable performance and waterproof.
-TFL SSS 3660 1620kv Brushless Motor
-Integrated TFL Drive with adjustable angle.
-Metal 42mm copper propeller.
-3/16" (4.75mm) Propeller Shaft
-ARTR(almost ready to run).
-Fiberglass battery tray

Hull Specs:
Length: 820mm
Width: 240mm
Height: 80mm

Requires:
Steering Servo
2 Channel Radio System
(1) 4s 45c 5000 MAH Lipo pack and charger

TFL Genesis 900 Catamaran

This boat comes assembled with all high quality equipment including cnc aluminum hardware.

Includes:
-Fiberglass hull for light weight and high strength.
-125amp esc for reliable performance and waterproof.
-TFL SSS 3674 2075kv Brushless Motor
-Water pickup rudder with kick-up rudder.
-Aluminum Strut
-38mm propeller.
-Propeller shaft 4mm diameter.
-Flex Cable .150 (4.00mm) diameter.
-ARTR (almost ready to run).
-Fiberglass battery tray

Boat Specs:
Total length with hardware 41.25" (1050mm)
Hull length, 37.00" (950mm)
Hull width, 9.75" (250mm)

Requires:
Steering Servo
2 Channel Radio System
(2) 2s 35c 5000 MAH Lipo pack and charger

Upgraded TFL Genesis 900 Catamaran.

We have added a Seaking 180, SSS 4082 1600kv Motor.
OSE .187 Cable system, Upgraded 3/16" Strut and CNC-4014250 Prop.

This boat comes assembled with all high quality equipment including cnc aluminum hardware.

Includes:
-Fiberglass hull for light weight and high strength.
-Seaking 180 reliable performance and waterproof.
-TFL SSS 4082 1600kv Brushless Motor.
-OSE One piece drive system.
-Water pickup rudder with kick-up rudder.
-OSE Aluminum 3/16" Strut
-40mm Cnc propeller cnc-4214250.
-Propeller shaft 3/16" diameter.
-Flex Cable .187 (4.75mm) diameter.
-ARTR (almost ready to run).
-Fiberglass battery tray
-OSE 6.0mm Bullet connectors

Boat Specs:
Total length with hardware 41.25" (1050mm)
Hull length, 37.00" (950mm)
Hull width, 9.75" (250mm)

Requires:
Steering Servo
2 Channel Radio System
(2) 2s 45c 5000 MAH Lipo packs
or
(2) 3s 45c 5000 MAH Lipo packs
(1) Charger

Note:
Batteries will require 6mm Female bullet on the Positive end and 6mm Male connector on the negitive end.
 

TFL Popeye Hydro : Green : ARTR

This boat comes assembled with all high quality equipment including cnc aluminum hardware.

Includes:
-Fiberglass hull for light weight and high strength.
-Seaking 120amp esc for reliable performance and waterproof.
-TFL SSS 3660 2070kv Brushless Motor
-Water pickup rudder with kick-up rudder.
-Aluminum Strut
-Metal 38mm copper propeller.
-Propeller shaft 3/16" (4.75mm) diameter.
-Flex Cable .187(4.75mm) diameter.
-ARTR(almost ready to run).
-Fiberglass battery tray

Boat Specs:
Total length with hardware 35"(895mm)
Hull length, 32" (820mm)
Hull width, 14.35" (365mm)
Color, Green fiberglass

Requires:
(1) Standard size servo for steering
(1) 2 Channel Radio System
(1) 4s 45c 5000 MAH Lipo pack with Deans Ultra Plus
(1) Charger for your battery pack

TFL Popeye Hydro : Yellow : ARTR

This boat comes assembled with all high quality equipment including cnc aluminum hardware.

Includes:
-Fiberglass hull for light weight and high strength.
-Seaking 120amp esc for reliable performance and waterproof.
-TFL SSS 3660 2070kv Brushless Motor
-Water pickup rudder with kick-up rudder.
-Aluminum Strut
-Metal 38mm copper propeller.
-Propeller shaft 3/16" (4.75mm) diameter.
-Flex Cable .187(4.75mm) diameter.
-ARTR(almost ready to run).
-Fiberglass battery tray

Boat Specs:
Total length with hardware 35"(895mm)
Hull length, 32" (820mm)
Hull width, 14.35" (365mm)
Color, Yellow Fiberglass

Requires:
(1) Standard size servo for steering
(1) 2 Channel Radio System
(1) 4s 45c 5000 MAH Lipo pack with Deans Ultra Plus
(1) Charger for your battery pack

TFL 41" (1040mm) Zonda Rc Boat, Twin Drive and Carbon fiber.

TFL built this boat out of carbon fiber for both super strength and very light weight. Both very important if your trying to make a fast electric rc boat. This boat comes assembled with all high quality equipment including cnc aluminum hardware.

Some of the major components include,
Carbon fiber hull for light weight and super strength.
Two Seaking 120 esc's for reliable performance and waterproof.
Two TFL SSS 3674 2075 KV Brushless Motors Adjustable twin struts
Metal left and right counter rotating propellers.

ARTR(almost ready to run). It requires a servo, 2 channel radio and batteries

Requires:
Steering Servo
2 Channel Radio System
(2) 4s or 5s 45c 5000 MAH Lipo packs and charger

Sale $79.99 while supplies last.

Reaction Lipo Pack - 3s 50C (11.1V) 5000mah

The Heavy Duty Reaction LiPo Battery packs from Dynamite represent awesome quality and value that provide the power and performance for the everyday RC enthusiast. These HD 50C packs were specially designed to provide the needed power applications that require a little higher demand like RC Boats and 1/5 and 1/6-scale vehicles.

Features:
Heavy Duty, performance-driven 50C discharge rating
3C charge rating for quick, safe recharging.
High capacity – 5000mAh
Prewired with popular, high power female EC5 connector
Hard casing provides increased durability and reliability XH balance adapters.

NOTICE FOR ORDERS OUTSIDE THE USA! The US Post Office has restricted Lithium packs from shipping. We can no longer ship these outside the USA! Sorry for this!!

 

Click picture for details & installation notes.

OSE carbon-fiber stuffing tube mount with fitting for oiling your cable.

Carbon fiber stands and aluminum center section. The carbon stands have glue holes for secure mounting to the inside of your hull and two long slots for stuffing tube height adjustment. The aluminum stuffing tube holder can also be angled

Comes in 3 sizes

ose-83010-7/32 for K&S 7/32 stuffing tube.
ose-83010-1/4 for K&S 1/4 stuffing tube.
ose-83010-5/16 for K&S 5/16 stuffing tube

OSE Cheetah Rc Boat, fiberglass & carbon inlayed catamaran artr(almost ready to run)

This hull is built for speed with carbon inlay for extra strength. All the parts are carbon fiber, fiberglass or aluminum, no wood in this hull.

We spec'd this boat to include a quality motor and esc. We water cooled the motor mount and water jacket to insure a cool running motor. Then matched the motor with a Seaking 180 and bullet connectors to make this a reliable setup, that's capable of high speeds.

Specs:
ESC: Seaking 180 Esc with 6mm bullet connectors: 180 amps - 6s Lipo Max Voltage
Motor: TFL SSS-4082 2000kv
Flex Cable .187 Flex Cable
Propeller Shaft: 3/16" Propeller shaft for use with all the popular propellers on the market.
Adjustable strut.
Water pickup rudder with breakaway screw to stop damage when objects are hit.
Battery trays: Carbon fiber
Coupler: 5mm - .187 coupler
Propeller: cnc-4214250 42mm diameter.
It can be powered with 4s to 6s Lipo for speeds up to 60mph

Specs:
Length: 34.00" (864mm)
Width: 13.50" (343mm) at widest point.

Requires:
(2) 2s or 3s 45c 5000mah lipo packs with 6.0mm bullet connectors.
(1) High torque servo
Two Channel Remote Control

 

Click picture for full specs.

Hifei Swordfish Pro+ 120 amp water cooled esc. The "+" means that this esc comes with a built in data logger to measure Current, Voltage, Motor RPM, Temprature and Throttle Travel. Programing can be done with your transmitter, optional program card, optional USB adapter or optional LCD Program Box/Handheld Unit.

120 Amps, 2s to 6s LiPo cells.
Built in Data Logger. Requires Windows xp or newer PC and optional USB programer.
Built in BEC(Battery eliminator circuit).

Click picture for full specs.

Hifei Swordfish Pro+ 200 amp water cooled esc. The "+" means that this esc comes with a built in data logger to measure Current, Voltage, Motor RPM, Temprature and Throttle Travel. This is a high quality ESC designed specifically for racing boat. Programming can be done with your transmitter, optional program card or optional USB adapter or optional LCD Program Box/Handheld Unit.

200 Amps, 4s to 8s LiPo Cells
NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit.

Built in Data Logger.

Requires Windows xp or newer PC and optional USB programmer.

This is Hot Racing RC connector soldering Clamp jig.

FEATURES: Ideal for soldering and all types RC connector. This jig quickly and securely clamps, holds, and releases these connectors for your soldering tasks.

This Jig clamp holds the most common RC connectors
- XT60
- Deans T connector
- Traxxas TRX Connector
- EC-2
- EC-3
- EC-4
- EC-5
- Deans Micro 2pin to 4pin connectors
- Bullet connectors from 2 to 6.5 mm

Can be use as motor holder fit both 5mm and 1/8 motor shaft.

Includes:
(1) Hot Racing RC connector soldering Clamp jig.

NOTE:
Soldering tips:
1) soldering iron is must be very HOT!!!!
2) Tin the wire and the connector pin with good amount of solder.
3) Now place the wire and connector pin together with the help of a very hot soldering tip the solder will melts
4) Then remove the soldering tip from the solder join, and let it cool done.

Warning, The most dangerous is to connect positive and negative wires together creating a short circuit.
1) One of the wires must be properly isolated at all times.
2) Only clamp on one pin at a time from the same battery. DO NOT solder both positive and negative connectors in the jig at the same time. Doing so will cause a short circuit and possibly a fire or explosion.

Hot Racing Pro Connector Soldering Jig.

Holds most types of RC battery connectors in place for soldering to wires.

Holds XT60, Dean's T-connector, Traxxas connector, EC2-EC5, Dean's, Micro 2pin-4pin connectors and bullet connectors from 2-6.5mm.

Magnetic two piece design with alligator clips and solder storage. Two alligator clips style holding clamps for wire. Wide aluminum base for added stability. Can also be used as motor holder, fits both 5mm and 1/8" diameter shafts.

Hot-Racing Aluminum Dual Water Outlet for the Traxxas Spartan Boat.

CNC aluminum construction, blue in color.

Includes:
(1) Aluminum Dual Water Outlet

Note: If used in a boat other than the Traxxas Spartan, this will require a 3mm x 6mm long screw (Or longer, length depends on hull thickness).

Works with 7/32, 1/4 or 9/32 water tubing.

CNC machined, billet aluminum construction with blue anodized finish for durability and corrosion resistance.

Replaces the stock Traxxas TRA5740 rudder blade on your Traxxas Spartan with a Dual water pickup rudder blade for additional cooling.

Includes:
(1) Dual pickup rudder blade with fittings.

Requires:
Adding a second water line and a water outlet Installing and attaching linkage, water line, and dual water outlet.

Specs:
Width of top of Rudder Blade: 1.21" (30.8mm)
Width of bottom of Rudder Blade: 1" (25.3mm)
Total Rudder Length: 3.94" (100mm)

CNC machined aluminum construction with blue anodized finish.
Fits the Stock holes in the Traxxas Spartan but will work with other Deep Vees or Monos in the 30" (750mm) - 38"(950mm) Range.

Increases performance and handling
Easy to install
Adjustable

Includes:
Two each; Aluminum Turn Fins Mounting Brackets 3mm Lock Nuts Socket Head Cap Screws

Specs:
Fin length: 3.2" (82mm) Fin thickness: 0.315" (8mm)

TFL T Bar stuffing tube mount

Aluminum stuffing tube mount, 53mm (2.087") wide for 7mm stuffing tube.

OSE "Target" outlet with dual discharge ports.

Picture number two shows the availible colors red, white or blue.

We designed these to look like a targeting sight. CNC cut from aluminum and anodized in silver. Designed for boats that are cooling the motor and esc individually. Using two outlets increases the flow of water for better cooling.

We made installation simple. In picture 4 you will see we included a sticker template. Stick the sticker to your hull and drill the necessary holes. Add some sealant, screw the included hex screws and your done.

Output fittings can accept 7/32" or 1/4' sized tubing.

Click picture for full specs.

Hifei Swordfish Pro+ 220 amp water cooled esc. The "+" means that this esc comes with a built in data logger to measure Current, Voltage, Motor RPM, Temprature and Throttle Travel. Programing can be done with your transmitter, optional program card, optional USB adapter or optional LCD Program Box/Handheld Unit.

220 Amps, 2s to 6s LiPo cells.
Built in Data Logger. Requires Windows xp or newer PC and optional USB programer.
Built in BEC(Battery eliminator circuit).

Click picture for more details

Sale $279.99

At a maximum of 300 amps and 60 volts, this is the most powerful esc that Hifei has ever produced. Able to provide power upto a 30 Horse Power Electric Motor!!! And with the new data logging feature, you will be able to take the guess work out of prop, motor or strut changes by logging the following info, Current/Amps, Voltage, Temperature, RPM, Power & Throttle travel.

Basic Specs:
- Shrink wrapped and conformal coated for resistance to water.
- 48cells NiMH/NiCad or 4 to 15 cell Lithium-polymer
- 300A continous (380A surge)
- Built in Data Logger. Inlcudes USB Programmer but  Requires computer with Windows XP, Vista or 7(will not work with windows 8).
- NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit.

TFL 5" T Bar stuffing tube mount with oiler hole.

Aluminum stuffing tube mount, 5" (127mm) wide for 9mm stuffing tube.

Note: See picture 3 for dimensions.
 

TFL Pursuit Rc Boat, artr(Almost Ready to Race)

Full carbon hull. FREE windshield Decal will supplies last. See picture 5

Specs:
SSS 3660
120 esc.
Length: 820mm
Width: 240mm
Height: 80mm

Requires:
Standard size steering servo
2 Channel Radio System
(1) 3s or 4s 45c 5000 Lipo packs and charger

NOTE: This boat comes with Deans Style connector. We suggest not using the Deans style connector, and changing it to 5.5mm bullet or OSE-qs6 style connectors.


 

Click picture for video and more details.

TFL Arrow Outrigger Rc Boat, artr(Almost Ready to Race)

If you are looking for a extremely fast boat that turns almost as fast as it goes in the straights, you found the right one. This boat comes assembled with all high quality equipment. 

Specs:
Hull Length: 24.2" ( 615mm)
Width: 18.10" ( 460mm)
Height: 2.56" (65mm)
Weight: 500grams
Fiberglass Sponsons for light weight and super strength.
70 Amp Esc, waterproof.
TFL SSS 2958 (29mm diameter x 58mm long) 3300KV Brushless Motors.
Metal propeller.
Prop Shaft: 4mm
ARTR(almost ready to run).

Requires:
Standard size steering servo
2 Channel Radio System
(1) 3s 30c 2200 Lipo pack with Deans Ultra connector and charger

TFL P1 Superstock Warrior Artr(Almost Ready to Race)

Sale, Free Shipping

Specs:
Hull Length: 34.65" (880mm)
Width: 11.05" (280mm)
Weight: 2520 grams
Fiberglass for light weight and super strength.
Outboard: Gear drive in metal and composite.
ESC: 120 Amp Esc, watercooled & waterproof.
TFL SSS 3660 (36mm diameter x 60mm long) 2070KV Brushless Motors.
Metal propeller.
Prop Shaft:
ARTR(almost ready to run).

Requires:
Standard size steering servo
2 Channel Radio System
(1) 3s 40c 3300 - 4500 mah Lipo pack with Deans ultra plug.
(1) Charger for your lipo packs

Click picture for more details

At a maximum of 300 amps and 60 volts, this is the most powerful esc that Hifei has ever produced. Able to provide power upto a 30 Horse Power Electric Motor!!! And with the new data logging feature, you will be able to take the guess work out of prop, motor or strut changes by logging the following info, Current/Amps, Voltage, Temperature, RPM, Power & Throttle travel.

Basic Specs:
- Features a metal case to function as a heat sink and water proof box for the circuitry!
- 48cells NiMH/NiCad or 4 to 15 cell Lithium-polymer
- 300A continuous (380A surge)
- Built in Data Logger. Includes USB Programmer but Requires computer with Windows XP or newer Windows PC.
- NO BEC(Battery eliminator circuit), will require optional receiver battery pack or optional external BEC circuit.

ProBoat OutBoard Leg.

This will fit boats in the 28-35" Range. The prop in this outboard is driven by a flex shaft, making it smooth and efficient. All aluminum lower unit makes for a strong, yet light weight outboard. The black top cover has screws that hold it on, in case of a crash/flip. This is a complete outboard unit with mounting brackets. Motor required.

Comes as a complete unit with mounting bracket. Propeller, motor and cooling jacket for motor are required.

Requires: Brushless Motor with 5mm Shaft.
Propeller that fits 3/16" Shaft. No larger in diameter than 45mm

Click picture for more details.

Mini OutBoard Motor.

This is a complete outboard unit with mounting brackets and 3000kv outrunner motor for 2s Lipo applications. It can be used with 3s lipo power with a light weight hull in the sub 1 pound range. The propeller in this outboard is CNC Aluminum and driven by a flex shaft, making it smooth and efficient. The all aluminum lower unit makes for a strong, yet light weight.

Requires:
7/32" water tubing.
Female 3.5mm bullet connectors.
Linkage rod.

TFL Integrated Drive System in grey anodized color.

This is the drive system only. Picture two shows this system installed in a TFL Pursuit hull. This will fit boats in the 28-35" Range.

Includes:
All items in picture one. (Integrated Drive ONLY)
Options:
Available with or without motor

Drive Specs:
120 Grams
3/16"(4.75mm) Propeller shaft
.187"(4.75mm) Flex cable

Picture 1 & 3 for measurements.
Picture 4 for exploded view.
Picture 5 for instructions.

Motor Specs:
TFL SSS 3660 with 4mm male & female connectors
36mm diameter
60mm long
1620Kv
5mm Shaft
Installed metal water jacket.

Requires:
Servo and boat. We recommend dh-hs-225BB Hitec Servo
 

We recommend no larger than a 36mm diameter x 60mm long motor. Any larger could damage the flex cable or parts.

TFL Scale Outboard with Black Cover(No Graphics Applied)

For a Limited Time Motors will come with FREE Merc Racing Decals. This is a user installed item. See picture 4 for what the decals look like once installed onto the drive unit.

This is the outboard system only. Picture 5 shows this system installed in a TFL Warrior P1 Superstock hull. Picture 6 Shows diagram and parts list.

Options:
Available with SSS 3660 2075Kv or Without motor.

Drive Specs for No Motor Version:
185mm from bottom of skeg to top of outboard cover.
Cover is 55mm wide
280 Grams(approx)
4mm Propeller shaft, requires drive dog style propellers.
Fits upto 48mm diameter Prop
Gear driven

Drive Specs for SSS Motor Version:
TFL SSS 3660 with 4mm male connectors.
Motor diameter: 36mm
Motor length: 60mm
2075Kv with 5mm Shaft
Installed metal water jacket.
185mm from bottom of skeg to top of outboard cover.
Cover is 55mm wide
550 Grams(approx)
Drive: 4mm Propeller shaft, requires drive dog style propellers.
Fits upto 48mm Prop
Gear driven

Requires:
Everything besides the outboard unit.
Suggest esc size, 150amp, 4s lipo esc.
Propeller, which prop depends on the application.
4mm Female Bullet Connectors(For Motor Version)

Notes:
-Recommended for 30"(750mm)  to 40" (1000mm) boat in the 4 Pounds Range.
-We recommend no larger than a 36mm diameter x 60mm long motor. Any larger could damage the gear system or other parts.
 

TFL Adjustable 5" T Bar stuffing tube mount with oiler hole. Adjusts from 4 7/8" (124mm) to 5 1/2" (140mm)

Silver anodized in aluminum

Note: See picture 3 for dimensions.
 

Offset strut bracket for TFL Genesis.

If you are having handing issues, the offset bracket will help move the rudder out of the water path from the prop. Moving the rudder outside of the thrust cone will sometimes help improve handling in certain hulls.

Includes:
Offset bracket only.
Strut and rudder system are shown for demonstration purposes only.

Shaft Tube Seal(STS) for .187 flex cable with 1/4" stuffing tube. Design by Aeromarine.

Aeromarine has always striven to bring you the latest in innovative R/C Marine products. The NEW STS is no exception. The explosion of today's new electric setups have sparked its own set of obstacles to overcome. Hulls need to be virtually hermetically sealed to prevent damage to expensive electronic components. Even the most seasoned builders have trouble with the elusive sealing of the stuffing box tube.  Not anymore! Extensive trial and error testing lead the way to our NEW  Patent Pending STS (Shaft Tube Seals) design. Compact and made of the BEST materials and bearings available. Install this fitting on the end of your stuffing box tube, the precision collar on the shaft,  and your tube is sealed from any water entering the hull. Grease fitting incorporated allows for easily greasing the shaft between runs. High Speed Bearings allows for a friction-less seal. One try and you'll have ALL your hulls outfitted. Great for nitro too.

Requires use with the following
.187 (3/16") flex cable.
1/4" (.250") (6.35mm) OD stuffing tube diameter.

Measures: approx 12.8mm (.50") diameter x 30.5mm (1.20") long
 

Leopard 3650 X2 Motor.

36mm Diameter by 50mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

5mm motor shaft.

We offer this in 2 versions.
3060kv and 3900kv

Shaft Tube Seal(STS) for .187 flex cable with 9/32" stuffing tube. Design by Aeromarine.

Aeromarine has always striven to bring you the latest in innovative R/C Marine products. The NEW STS is no exception. The explosion of todays new electric setups have sparked its own set of obstacles to overcome. Hulls need to be virtually hermetically sealed to prevent damage to expensive electronic components. Even the most seasoned builders have trouble with the elusive sealing of the stuffing box tube.  Not anymore! Extensive trial and error testing lead the way to our NEW  Patent Pending STS (Shaft Tube Seals) design. Compact and made of the BEST materials and bearings available. Install this fitting on the end of your stuffing box tube, the precision collar on the shaft,  and your tube is sealed from any water entering the hull. Grease fitting incorporated allows for easily greasing the shaft between runs. High Speed Bearings allows for a frictionless seal. One try and you'll have ALL your hulls outfitted. Great for nitro too.

Requires use with the following
.187 (3/16") flex cable.
9/32" stuffing tube diameter.

Measures: approx 12.8mm (.50") diameter x 30.5mm (1.20") long
 

Shaft Tube Seal(STS) for .250 flex cable with 11/32" stuffing tube. Design by Aeromarine.

Aeromarine has always striven to bring you the latest in innovative R/C Marine products. The NEW STS is no exception. The explosion of todays new electric setups have sparked its own set of obstacles to overcome. Hulls need to be virtually hermetically sealed to prevent damage to expensive electronic components. Even the most seasoned builders have trouble with the elusive sealing of the stuffing box tube.  Not anymore! Extensive trial and error testing lead the way to our NEW  Patent Pending STS (Shaft Tube Seals) design. Compact and made of the BEST materials and bearings available. Install this fitting on the end of your stuffing box tube, the precision collar on the shaft,  and your tube is sealed from any water entering the hull. Grease fitting incorporated allows for easily greasing the shaft between runs. High Speed Bearings allows for a frictionless seal. One try and you'll have ALL your hulls outfitted. Great for nitro too.

Requires use with the following
.250 (1/4") flex cable.
11/32" stuffing tube diameter.

Leopard 3660 Motor.

36mm Diameter by 60mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes vented endbells that are assembled with screws for both strength and ease of maintenance.

5mm motor shafts.

2050kv

Scale Evinrude Outboard units made in Europe.

Carbon filled 3 blade, 43mm diameter propeller is included. Made in white fiberglass plastic with Evinrude decals.

Includes: Everything in the picture.

Specs:
See picture 2 for sizes
6.10 Ounces.
Steel gears

Requires: Motor with 5mm diameter shaft and 19mm motor hole mounting spacing.

Options: Turnigy" 3548/4" 1100KV with 3 to 5s LiPo with 3mm x 8mm long mounting screws.

Notes: This is designed for scale boats in the 25" (650mm) to 35" (900mm) length range and 3-5 pounds total weight. The manufacturer suggests a Turnigy" 3548/4" 1100KV motor on 3s to 5s. If your boat falls within those specs, we suggest a 90amp or greater
 

This is the Hyper Performance Bullet Drive Outboard motor leg.
If you are looking for all out speed or racing, this is the outboard for you.
Designed to handle the power of a 36mm and 40mm (540 sized) medium to long length brushless motor.

Comes with the following.
(1) pn#350bd Lower Unit
(1) pn#psa35 3/16" Prop shaft and bushing assembly for 3/16" props.
(1) pn#dc1563s2 Flex Cable
(1) pn# obmm35 adjustable mount with both height and angle adjustment.
(1) Pn#eobck35-5mm which includes the a 5mm coupler for a brushless motor that has a 5mm shaft and brushless motor mounting plate for brushless motors that have a 25mm screw hole spacing. Motor mounting screws, 3mm.

Leopard 3660 X2 Motor.

36mm Diameter by 60mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes vented endbells that are assembled with screws for both strength and ease of maintenance.

5mm motor shafts.

We offer this in 2 versions.
2380kv and 3180kv

Click picture for HD video & more info.

QUALIFIES for FREE Shipping in the USA.

If your looking for a high speed, well built rtr boat, you found the right one. The Blackjack with hit speeds from 35-50mph(depending on battery choice).

-Includes a new fiberglass hull and durable canopy that have been shaped to withstand the rigors of high-speed action
-Includes Spektrum™ 2.4Ghz DX2E marine radio system including the SR410 receiver Off-set rudder system provides superb stability in all wake conditions while keeping the model glued to the waterWater-cooled -Dynamite water cooled marine 120 Amp ESC (6S compatible) and 2000Kv brushless motor
-ESC comes pre-wired with dual high-current EC5™ connectors
-Dual Li-Po or Ni-MH operation
-Metal propeller
-Waterproof electronics
-Designed to be competition ready out of the box

Click picture for more detail.
Leopard 3674 Motor.

On Sale while supplies last $69.95.

36mm Diameter by 74mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

We offer this in 4 versions.

1400kv/rpm per volt 2.5y
1700kv/rpm per volt 2Y
2200kv/rpm per volt 3D
3270kv/rpm per volt 2D

Click picture for more details.

Sale $69.99 while supplies last.

As of 3/29/2017 we have increased the lenght of the motor wires to 150mm long.

The OSE Raider 6s 150 Amp Esc was designed with large heat sink and dual water cooling tubes for superior cooling. Heavy 10 gauge wire and 4 capacitors.

We made this super easy to install. We install 6mm female bullet connectors on the motor side. This allows a plug and play esc when combined with the Leopard Motors we sell (contact us if in doubt about your setup). We then install a OSE-qs6p high amp connector for the Battery End.

This esc is specially designed for use in rc boats.
Excellent waterproof design allows this ESC to work in wet conditions.
Optional  LED Program Box for easy setting of all the esc's parameters.
Low voltage protection.
Thermal protection, if esc goes over 100C (212F) the output will reduce to and not return to normal until the temperature reaches 80c (176F) or less.
Built in BEC (battery eliminator circuit) to power your receiver.
Throttle signal loss protection.

This esc was designed to work in an environment where its possible for the esc to get wet on occasion. Not for use undewater. OSE does not suggest using this item under water!!

This esc is suggested for smaller boats upto the 27"- 40" (550mm - 1000mm) range. Because there are so many variables with each hull and installation its impossible to specify all the applications for this esc. If you have any questions on using this esc with your particular boat, please contact us before purchase.

Click here for manual.

Lithium Polymer 1000mAh 11.1V 30C Battery Pack with Balance Connector.

FEATURES

Balancing allows all cells to fully charge to 4.2V ensuring
maximum power from the pack, plus conditions the cells better
so they will last longer
Safer as long as the Cell Balancer or a properly equipped Charger
with Balancing Capabilities is used

INCLUDES

Great Planes ElectriFly Lithium Polymer 1000mAh 11.1V 30C Balance
Battery Pack with ElectriFly Balance Connector, Star Plug
Connector and Instruction Sheet

REQUIREMENTS

LiPO compatible charger and balancer such as the ElectriFly
LiPo Charging Bag

Specs:
Capacity: 1000mAh
Number of Cells in Series: 3
Rated Voltage: 11.1V
Discharge Current: 30C
Maximum Recommended Charging Amps: 1A
Pack Dimensions: 2.6 x 1.4 x 0.71" (66 x 36 x 18mm)
Weight: 3.4oz (96g)

COMMENTS
READ the ENTIRE instruction sheet included with battery before use
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during Charging
ALWAYS charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

Click picture for more detail.

Leopard 3674 X2 Motor.

36mm Diameter by 74mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

We offer this in 2 versions.
1900kv and 2650kv

Click picture for more info.

QUALIFIES for FREE Shipping in the USA.

Proboat Voracity Rc Boat, Type E RTR 36-inch Brushless Deep-V

Satisfy your craving for speed and precision with the Voracity™-E 36 Brushless Deep-V. Sitting beneath the sleek trim scheme and canopy of the Voracity™-E Brushless Deep-V you’ll find a water-cooled 120A ESC and a fierce 6-pole 1650Kv 40x82mm brushless motor. This unbeatable combination sits atop a hand-laid Deep-V fiberglass hull that has been optimized for peak performance, even in rough conditions. Push the speed envelope and give the competition a run for their money on the open water today.

Features:

    Capable of reaching speeds of 50+ mph
    Includes Spektrum™ 2.4GHz DX2E DSMR Radio System with SR310 Receiver
    Water-cooled Dynamite® marine 120-amp ESC (6S compatible)
    Optimized hull constructed from lightweight fiberglass
    Offset rudder, rudder-mount, and prop strut built of high-strength aluminum
    High torque, waterproof steering servo
    Sealed twist latch canopy system
    Waterproof electronics

Click picture for more detail.
Leopard 4074 Motor.

Special while supplies last! FREE Water Jacket with Leopard 4074 Motor Purchase!

40mm Diameter by 74mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

We offer this in 6 versions.

1050 Kv/rpm per volt
1400 Kv/rpm per volt
1650 Kv/rpm per volt
1800 Kv/rpm per volt
2000 Kv/rpm per volt
2200 Kv/rpm per volt

Click picture for more detail.
Leopard 4075 X2 Motor.

Special while supplies last! FREE Water Jacket with Leopard 4075 X2 Motor Purchase!

40mm Diameter by 74mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Available in two versions.
1750 Kv/rpm per volt 2.5Y
2650 Kv/rpm per volt 1.5Y

Mean Machine 2, same super fast hull design as the original Mean Machine, but with the updated racing inspired cowl. This fiberglass hull is a lightweight fiberglass with an inlaid Carbon Fiber tunnel section for added strength and rigidity.

It can be powered with 3s, 4s or 6s Lipo

Suggested hardware:
Leopard 4074 or 4082 motor.
150-200 Amp ESC
Speedmaster 21 strut, round bottom-hydro design
Ose-80050 Rudder
OSE-1190 3/16" cable
1/4" stuffing tube.

Specs:
Measures 29.5" x 11"
White fiberglass gelcoat finish.

Any questions please email us for help and info.

Click picture for more detail.
Leopard 4082 Motor and 4082 X2 Motors.

The Leopard has been the standard in High value/High quality at a low cost motor on the market. Leopard has released a new version of the popular 1600kv and 2200kv sizes, called the X2. Same physical size & performance with different end bells and logos.

Special while supplies last! FREE Water Jacket with Leopard Motor Purchase!

40mm Diameter by 82mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Click picture for more info.

SpeedMaster small inline skeg strut and single pickup rudder assembly.

Cnc Machine cut in the USA from High Quality Aluminum. Straight blade rudder with dual water pickups and strut for 3/16" propeller shaft. We estimate this will work with 30"(750mm) to 40"(1000mm) catamaran hulls. Requires only 4 mounting holes for quick and easy mounting.

Specs:
Dimensions: See picture, sizes are +/- 1mm
Weight: 125 grams
Mounting plate measures 29mm ("1.125") wide by 25.5mm("1.00) tall Skeg Style Strut
Rudder arm on both left and right side of blade.
 

Black fiberglass ESC Mount for large esc.

Fits an esc with a maximum width of 65mm.

Allows your esc to be strapped into the mount and raised off the hull floor to help prevent water damage.

Measures 124mm x 76mm

Requires:
Velcro and Velcro straps

Includes:
Mount only. Esc in picture for display only.
You can see included items in pictures 2 & 3.

Manufactured and designed by Model Boat Pirate.

Black fiberglass ESC Mount for medium size esc

Fits an esc with a maximum width of 50mm.

Allows your esc to be strapped into the mount and raised off the hull floor to help prevent water damage.

Measures:
60x62mm
13mm high

Requires: Velcro and Velcro straps Includes:

Mount only. Esc in picture for display only. You can see included items in pictures 2 & 3.

Manufactured and designed by Model Boat Pirate.

ESC Mount for Seaking 180 v3

Allows your esc to be strapped into the mount and raised off the hull floor to help prevent water damage.

Measures:
78x73mm
17.5mm high

Requires:
Velcro and Velcro straps

Includes:
Mount only. Esc in picture for display only.
You can see included items in picture 3.

Manufactured and designed by Model Boat Pirate.

Click picture for more detail.
Leopard 4092 Motor.

Special while supplies last! FREE Water Jacket with Leopard Motor Purchase!

40mm Diameter by 92mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

We offer this in 7 versions.
700 Kv/rpm per volt 4Y
930 Kv/rpm per volt 3Y
1050 Kv/rpm per volt 5D
1390 Kv/rpm per volt 2Y
1480 Kv/rpm per volt 3.5D
1730 Kv/rpm per volt 3D
2080 Kv/rpm per volt 2.5D

Click picture for more info.

Fiberglass, Water cooled heavy duty motor mount for 40mm motors.
Example, TP 40xx, Leopard 4074, 4082 and 4092 brushless Motors.

Fits 40mm diameter motors that are 60mm or longer in length.
Both water cooled and adjustable. Rear motor clamp helps carry the weight of the heavier/longer 40mm motors.  Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended fiberglass mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can will fit a vee bottom or similar hull. It will require modifying to fit  a flat mounting area like a rigger or hydro.

Click picture for more info.

Carbon fiber, Water cooled heavy duty motor mount for 40mm motors.
Example, TP 40xx, Leopard 4074, 4082 and 4092 brushless Motors.

Fits 40mm diameter motors that are 60mm or longer in length.
Both water cooled and adjustable. Rear motor clamp helps carry the weight of the heavier/longer 40mm motors.  Angle is adjustable to allow straight alignment with propeller cable.

The anodized aluminum mounting plate with extended Carbon fiber mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can will fit a vee bottom or similar hull. It will require modifying to fit  a flat mounting area like a rigger or hydro.

Click Picture for full details.
Leopard 5692 Motor

Special while supplies last!
FREE Water Jacket with Leopard Motor Purchase!

56mm Diameter x 92mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.

We offer this in 5 versions.
540 Kv/rpm per volt 8mm Motor Shaft
730 Kv/rpm per volt 8mm Motor Shaft
1000 Kv/rpm per volt 8mm Motor Shaft
1090 Kv/rpm per volt 8mm Motor Shaft
1340 Kv/rpm per volt 8mm Motor Shaft

Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Click picture for more info.

High mount fiberglass, Water cooled heavy duty motor mount for 40mm motors.
This is for mounting a motor on a flat surface, for example riggers, cats and hydros. The higher fiberglass stands allow more clearence for the water jacket.

Fits 40mm diameter motors that are 60mm or longer in length.
Example, TP 40xx, Leopard 4074, 4082 and 4092 brushless Motors.

Both water cooled and adjustable. Rear motor clamp helps carry the weight of the heavier/longer 40mm motors.  Angle is adjustable to allow straight alignment with flex cable.

The anodized aluminum mounting plate with extended fiberglass mounting stands to distribute the weight of the motor over a larger area for added strength. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull.

Note: This mount can also fit a vee bottom hull, but we suggest the lower ose-80600 or ose-80610 for a lower center of gravity in hulls with a vee.

Click picture for more details.

Etti High Voltage 220A Opto PRO II Navy Competition Brushless ESC for up to 60 Volts.

Specs:
Voltage: 12 - 60 V
NiMH: 10 - 40 Cells
LiPo: 4 - 14 Cells
Current: 220 Amp
Battery Eliminator Circuit(BEC): NO
Resistance: 0.001 £
Size: 100x65x22mm
Weight: 315g (including wires & HV Cap's Module)
(Ultra Low Resistance Version)

This is a water resistant esc with water cooling for Fast Electric rc boaters.

NOTE: Pictures 2 and 3 show the esc with an attached capacitor board.
The board is included but not installed. This is for example placement/installation purposes only.

Click Picture for full details.
Leopard 5698 Motor

Special while supplies last!
FREE Water Jacket with Leopard Motor Purchase!

56mm Diameter x 98mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.

We offer this in 3 versions.
835 Kv/rpm per volt
910 Kv/rpm per volt
1100 Kv/rpm per volt

Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Click picture for HD video & more info.

QUALIFIES for FREE Shipping in the USA.

The DCB M41 Widebody catamaran, designed by DCB (Dave’s Custom Boats) founder Dave Hemmingson, is the largest model offered in the DCB M-Series. With its precision sculpted design and a pair of Mercury Racing 1350 engines, it speeds across the water at 175mph! Traxxas has faithfully captured the incredible looks and performance of the DCB M41 in a detailed scale replica that is versatile, fun, and fast. The catamaran hull has been accurately reproduced to deliver the speed, stability and confidence that the full-size M41 is famous for, allowing you to have fun wherever your marine adventures take you. The M41 replica is equally at home blasting across the waves at the lake on a fun run or exploiting its 50+mph speed on a favorite stretch of smooth water. The razor sharp handling lets you carve turns with authority and precision and yet, offers easy control while cruising by the shore. If your looking for a high speed, well built rtr boat, you found the right one. The Blackjack with hit speeds from 35-50mph(depending on battery choice).
 

Click Picture for full details.
Leopard 56110 Motor

Special while supplies last!
FREE Water Jacket with Leopard Motor Purchase!

56mm Diameter x 110mm Long Brushless Motor by Leopard Power. Hand wound for high efficiency of up to 90%.

We offer this in 3 versions.
640 Kv/rpm per volt
780 Kv/rpm per volt
950 Kv/rpm per volt

Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Click picture for more details.

Fits motors 40mm in diameter that are 82mm long and longer. For example Neu, Leopard TP and the other popular sizes. Additional rear motor clamp helps carry the weight of the long 40mm motors.

Angle is adjustable to allow straight alignment with propeller cable. The aluminum mounting plate with extended Carbon Fiber mounting stands to distribute the weight of the motor over a larger area. The mounting plates that have holes drilled in the bottom to allow epoxy to flow into them to make a superior bond to the hull. This mount can fit a flat mounting area like a rigger or hydro, or a deep vee.

Requires you to provide motor mounting screws

4" Rail mount for Deep Vee bottom hull. Good for converting nitro engine boats to electric motors.
Motors that are longer than 70mm will sit on the rear motor channel for added strength/support.

Motor applications:
Tp36xx, Leopard 36xx

Will fit upto a 60mm long water jacket.

Requires:
You to provide motor mounting screws.

Includes:
Mount in picture 1

4" Rail mount for Catamaran hull. Good for converting nitro engine boats to electric motors.

Motors that are longer than 70mm will sit on the rear motor channel for added strength/support.

Motor applications:
Tp36xx, Leopard 36xx

Will fit upto a 60mm long water jacket.

Requires:
You to provide motor mounting screws.

Includes:
Mount in picture 1

40mm Quick Change Mount, designed by Anthony Vaccaro.
Designed to speed up swamping of a motor during a race or if your just tired of trying to remove the front screws on your motor for maintenance.

Once the coupler is loosened, the motor can be removed in less than a minute. Normally racers would have to remove the front screws which could take a few minutes and more importantly, once a motor is removed in a conventional mount, the motor angle has to be realigned. With only 4 screws the motor is removed, while maintaining the motor angle. Also features clear access to the front motor vents to allow maximum cooling. See video for a quick change.

Material:
Carbon fiber stands
Aluminum cnc motor brackets.

Motor applications:
Motors with 4 Bolt front motor plates, Tested to work with Leopard 4 Bolt Front plate 40mm Motors.

Requires:
You to provide motor mounting screws.

Includes:
Mount in picture 1

40mm Quick Change Mount, designed by Anthony Vaccaro.
Designed to speed up swamping of a motor during a race or if your just tired of trying to remove the front screws on your motor for maintenance.

Once the coupler is loosened, the motor can be removed in less than a minute. Normally racers would have to remove the front screws which could take a few minutes and more importantly, once a motor is removed in a conventional mount, the motor angle has to be realigned. With only 4 screws the motor is removed, while maintaining the motor angle. Also features clear access to the front motor vents to allow maximum cooling. See video for a quick change.

Material:
Carbon fiber stands
Aluminum cnc motor brackets.

Motor applications:
Motors with 6 Bolt front motor plates, Tested to work with Tp or Neu 6 Bolt Front plate 40mm Motors.

Requires:
You to provide motor mounting screws.

Includes:
Mount in picture 1

Click picture for video and full details.

ProBoat 23 River Jet Boat

QUALIFIES for FREE Shipping in the USA.

There's nothing like riding in a full-scale jet boat, from jumping waves to darting across the lake. Jet boats can change direction in a heartbeat, providing thrill ride after thrill ride. The 23-inch RTR Deep-V River Jet Boat lets you cruise anywhere—including through rapids and moving water. The jet boat doesn't have an exposed propeller, turn fins or rudder. And with its powerful propulsion system, this boat can run in minimal amounts of water—even just a few inches. Thanks to its self-righting feature, the boat flips back over in a matter of seconds by activating the throttle. So whether you're new to RC boating or an experienced captain, you're sure to have a blast jumping rapids and running upstream.

Click picture for video and full details.

ProBoat UL-19 30" Brushless Hydroplane RTR

QUALIFIES for FREE Shipping in the USA.

You asked for it and now it's here-the ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane. Its design is ultra sleek, with no turbine housing or rear spoiler. And boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks to the 6 pole water-cooled motor and 120A ESC. A waterproof Spektrum™ 3KG servo lets you take corners at full speed without fear! On top of that, the UL-19, which is built to NAMBA race specifications, comes equipped with all the aluminum running gear you need and a stainless steel turn fin. This is adrenaline-pumping, heart-pounding action you won't soon forget.

OSE motor mount for Castle Creations 2028

CNC aluminum center section with carbon fiber top plate for a base to install your esc or just look cool. Front and rear plate sandwich the motor between them making for a very strong mount.

The center aluminum section measures 5" wide. This can be used in boats that have existing 5" wooden rails.

Comes with mount only. Motor and water jacket only in pictures for display purposes.

OSE Rear motor clamp with carbon fiber stands.

If you have a boat with a front style motor mount and are upgrading to a longer or heavier motor, this may be what you need to support your motor.

The larger upgrade motors are typically heavier than stock motors which puts a strain on the front mount, causing the mounting area to break and flex cables binding/breaking due to the motor bouncing up and down. This mount is adjustable up and down, but may need to be cut or altered to fit your particular application. We added lots of glue holes to the bottom of the carbon mount for added strength when glued into your hull.

We have this for either 36mm or 40mm diameter motors.

Includes:
Everything in the picture.

Sale $649.99

TFL Cheetah Rc Boat, fiberglass & carbon inlayed catamaran with twin motors. artr(almost ready to run)

This hull is built for both speed and strength using fiberglass with carbon inlay. All the parts are carbon fiber, fiberglass or aluminum, no wood in this hull.

We spec'd this boat to include Seaking 120 ESC's with SSS 3674 2075kv motors for both speed and reliability.

Specs:
ESC: (2) Seaking 120 Escs with Deans Style ultra connectors: 120 amps - 6s Lipo Max Voltage
Motors: (2) TFL SSS-3674 2075kv
Flex Cable .187 Flex Cable
Propeller Shaft: 3/16" Propeller shaft for use with all the popular propellers on the market.
Adjustable struts.
Water pickup rudder with breakaway screw to stop damage when objects are hit.
Battery tray: Carbon fiber, center mount.
Coupler: 5mm - .187 coupler

It can be powered with 4s to 5s Lipo.

Specs:
Length: 34.00" (864mm)
Width: 13.50" (343mm) at widest point.

Requires:
(2) 4s or 5s 45c 5000mah lipo packs with Deans Ultra style connectors.
(1) High torque servo
Two Channel Remote Control

 

Delta Force Pirate 35" Fiberglass Hull. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Designed as a deep vee with a small rear pad makes this boat both handle well and achieve a very good top speed. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.
Pictures show the hull in color Delta Force Red and Delta Force Yellow.

Measures:
Approx. 34.85" x 10.25"
Approx. 885mm x 260mm
Weighs 2.45 pounds
 

8 gauge Silicon Wire with either Black or Red insulation.

High strand count for high amp applications. Great for batteries and wire adapters.

Specs:
Strand count: 1650/0.08mm

Comes in 3 foot (900mm) lengths.
Silicon insulation in either black or red

TFL Cheetah Rc Boat, fiberglass & carbon inlayed catamaran artr(almost ready to run)

This hull is built for speed with carbon inlay for extra strength. All the parts are carbon fiber, fiberglass or aluminum, no wood in this hull.

We spec'd this boat to include a quality motor and esc. We water cooled the motor mount and water jacket to insure a cool running motor. Then matched the motor with a Seaking 180 and bullet connectors to make this a reliable setup, that's capable of high speeds.

Specs:
ESC: Seaking 180 Esc with 6mm bullet connectors: 180 amps - 6s Lipo Max Voltage
Motor: TFL SSS-4082 1600kv
Flex Cable .187 Flex Cable
Propeller Shaft: 3/16" Propeller shaft for use with all the popular propellers on the market.
Adjustable strut.
Water pickup rudder with breakaway screw to stop damage when objects are hit.
Battery trays: Carbon fiber
Coupler: 5mm - .187 coupler

It can be powered with 4s to 6s Lipo for speeds up to 60mph

Specs:
Length: 34.00" (864mm)
Width: 13.50" (343mm) at widest point.

Requires:
(2) 2s or 3s 45c 5000mah lipo packs with 6.0mm bullet connectors.
(1) High torque servo
Two Channel Remote Control

 

Delta Force Explorer 36 Catamaran Fiberglass Hull.

These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Measures:

Length 36.75" (934mm)
Width 11" (279mm)

Width of the tunnel is 4 5/8" (117mm)
Width of the pads are 2 7/8" (73mm)
Transom overhang is 4" (101mm)

GPS Speed Meter

Dynamite's GPS Speed Meter and Tracker provides car/truck, boating and air enthusiasts with a compact, portable and easy to use GPS device for tracking everything from top speed reached to locations of their model. The unit's compact size and ultra light weight allows for it to be utilized in various applications including everything from large scale aircraft to 1/10th or smaller radio control cars/trucks/boats.

Thanks to the units built-in WASS/EGNOS/MSAS/RTCM (Global Positioning compatibility by country or region), the unit can be used anywhere in the world. The unit uses 10Hz refresh rate providing extremely fast response to changes in the models position while the units low power consumption provides the user with up to 4 hours of uninterrupted tracking time.

The unit's LCD screen provides real-time data feedback and it's waterproof design allows for use in virtually all weather conditions. You can also use the Dynamite GPS Logger* software to map your drive, flight, jog, swim, etc. using Google mapping products.

The LCD screen will display average, current, and peak speed. As well as current and max altitude, total distance, and GPS coordinates.

Features:
Track: Location, speed, altitude and much more.
Compact size allows for fit easy almost anywhere.
Lightweight for almost any RC application.
Built-in high-capacity LiPo Battery - 4 hours cont. tracking.
USB cable included for charging.
PC Interface for mapping on Google map products.
Can be used in real-world application worldwide.
Reads speeds up to 560 MPH (900 KPH).
Switch between Metric and Imperial units using PC software.

The adjustable strut.  Aluminum, CNC cut.

Works well on catamarans with transom overhang.

Measure approx.
110mm (4.3") in length.
30mm tall x 25mm wide.

Lead teflon bushing for 3/16" (.187", 4.75mm) propeller shaft.

Twin strut set for 30"- 38" (750mm - 950mm) catamaran. Aluminum, CNC cut.

Set of two struts for a twin motor/engine setup. Requires a catamaran with transom overhang.

Measure approx.
Strut 110mm (4.3") in length.
Transom mounting plate 33mm tall x 20mm wide.
Transom overhang mounting plate size 20mm by 20mm.

Lead teflon bushing for 3/16" (.187", 4.75mm) propeller shaft.

Delta Force Vortex 34" Hydro. These light weight fiberglass boats are built for Fast Electric Rc Boat Racing. Hull and deck are joined leaving only a very small pencil width seam, similar to the European designed hulls.

Specs:
Approx 33.75" x 16.5" inches
Approx 855mm x 420mm
Approx 3.75 pounds

Comes as a bare hull.

Basic Power & Hardware Recommendations:
Cells: 4s - 6s Lipo
Leopard 4082 or larger sized brushless motor.
 

CNC aluminum MBP 148mm "smart Drive" Power Trimm

This works well in catamarans that have a transom with a long overhang. Especially in a twin setup. Keep in-mind these are sold as singles. A twin setup will require two of these.

Measurements:
See picture #6

Includes:
(1) Strut with prop shaft for 3/16" (4.75mm) propellers.
Picture #3 shows all included parts.

Requires:
Customer to supply .187 (4.75mm) flex cable.
.187 (4.75mm) flex cable to be glued or soldered into pro shaft.

Note:
Boat not included.
MBP Picture shows no space in between drive dog and strut. OSE suggests 3-4mm of space in this area to stop binding when the flex cable contacts under load.
 

HRC Rail mount for Neu 1521, 1527, 1530 motors when used with 3mm Screws.

These can be used to convert nitro/gas hulls to electric power. Slotted mounting holes for ease of alignment. Vented front mounting plate to aid the in cooling of the motor.

Requires:
Neu motor with 3mm screws, spaced 25mm apart.

Includes:
Mounting screws (longer may be required if rails are thicker than normal).

 

Click picture for more detail.

SSS 3660 Motor.

Special while supplies last! FREE Water Jacket with Motor Purchase!

36mm Diameter by 60mm Long Brushless Motor by TFL Racing. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Vented endbell and front mounting plate for additional air cooling.
 

Click picture for more detail.

SSS 3674 Motor.

Special while supplies last! FREE Water Jacket with Motor Purchase!

36mm Diameter by 74mm Long Brushless Motor by TFL Racing. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Vented endbell and front mounting plate for additional air cooling.
 

Click picture for more details.

This is the new GPS V4 Module for the from Eagle Tree Systems.

Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, 10Hz update rate, built-in patch antenna.

Requires: Eagle Tree V3

Click picture for more detail.

SSS 4074 Motor.

Special while supplies last! FREE Water Jacket with Leopard Motor Purchase!

40mm Diameter by 74mm Long Brushless Motor by TFL Racing. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Vented endbell and front mounting plate for additional air cooling.

2200kv, 6 Pole brushless motor

Click picture for more detail.

SSS 4082 Motor.

Special while supplies last! FREE Water Jacket with Leopard Motor Purchase!

40mm Diameter by 82mm Long Brushless Motor by TFL Racing. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Vented endbell and front mounting plate for additional air cooling.

2000Kv or 2200Kv
4 Pole brushless motor

Click picture for more detail.

SSS 4092 Motor.

Special while supplies last! FREE Water Jacket with Leopard Motor Purchase!

40mm Diameter by 82mm Long Brushless Motor by TFL Racing. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Includes endbells that are assembled with screws for both strength and ease of maintenance.

Vented endbell and front mounting plate for additional air cooling.

4 Pole brushless motor

Click picture for more details.

OSE motor mount for 56mm diameter motors

CNC aluminum rings with carbon fiber mounting rails. Mounting rings can slide forwards and backwards. This is a very versatile mounting with the mounting holes in the rails. 

The center aluminum rings measure approx 3.94" (100mm)

Click picture for more detail.

TP Power Brushless 3630 V1 Motors.

36mm Diameter by 61mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation. V1 motors are a three piece can design. Front and back plates screwed on.
 

Aluminum cnc thru hull water pickup fitting with dual inlets. This water fitting is designed to be installed into the floor of your hull. It allows the constant flow of water that your boat is riding on to travel up and into your water system. Dual inlets allow individual cooling to your esc and motor.

This can be used with 1/4" silicon tubing we sell part# ose-tubing-1/4-clear

Aluminum cnc water pickup fitting with dual inlets. This water fitting is designed to be installed onto the transom for quick and easy installation. It allows the constant flow of water that your boat is riding on to travel up and into your water system. Dual inlets allow individual cooling to your esc and motor.

This can be used with 1/4" silicon tubing we sell part# ose-tubing-1/4-clear.

Measures .83"(21mm) wide x .81"(20.5mm) depth

Click picture for more detail.

TP Power Brushless 3640 V2 Motor.

36mm Diameter by 75mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.
 

OSE 56mm Angled Motor Mount for 56mm diameter motors.

CNC cut aluminum mount works well in narrow areas like catamaran sponsons where there isn't enough room for an adjustable mount. The fixed angle is ridged enough for the longest of 56mm motors. Shown in picture with Leopard 5692(not included) and Ham-leopard-56L water jacket(not included).

Specifications:
Motor holes are 30mm apart.
Holes for 4mm screws.
67mm (2.64") wide.
Weight 3.4 ounces

Requires:
Installation, Glue and fiberglass to fix the mount into the hull. Motor mounting screws.

Click picture for more detail.

TP Power Brushless 3650 Motor

36mm Diameter by 85.5mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation. V1 motors are a three piece can design. Front and back plates screwed on.
 

Click picture for more detail.

TP Power Brushless 4050 Motor

Special while supplies last! FREE TP-cj40L Jacket (40mmx53mm long) Water Jacket with TP Motor Purchase, $20 Value!

40mm Diameter by 83mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.

V1 Motors are a 2 piece design (see picture).
V2 motors are a three piece can design. Front and back plates screwed on.


 

Adjustable 56mm Motor Mount.

Works with 56mm motors. For example Leopard 5692, 5692 and 56110. Integrated top plate can be used to mount an esc. All Aluminum construction.

Note: If mounted in a flat bottom hull, this will require mounting blocks to lift the rear of the mount. Works with upto a 75mm long water jacket.

Install Note: Center metal section measures 4" wide, so if needed the center two metal parts can be used in hulls that have 4" wide rails.


 

Click picture for more detail.

TP Power Brushless 4060 V1 Motor

Sale on 1050kv verion, save $15.00

Special while supplies last! FREE TP-cj40L Jacket (40mmx53mm long) Water Jacket with TP Motor Purchase, $20 Value!!!

40mm Diameter by 92mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation. V1 motors are a three piece can design. Front and back plates screwed on.
 

Click picture for more detail.
TP Power Brushless 4070 Motor

Special while supplies last! FREE TP-cj40L Jacket (40mmx53mm long) Water Jacket with TP Motor Purchase, $20 Value!!!

40mm Diameter by 100mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.
V1 Motors are a 2 piece design (see picture).
V2 motors are a three piece can design. Front and back plates screwed on.
 

Click picture for more detail.
TP Power Brushless 4070CM Motor
These are higher output than the tp-4070, they are rated to run upto 75,000rpm for 10 seconds or less. These are designed for rc boats, trucks or cars that are running high speed straight line competition. NOT for long run times.

Special while supplies last! FREE TP-cj40L Jacket (40mmx53mm long) Water Jacket with TP Motor Purchase, $20 Value! Special while supplies last!!!

40mm Diameter by 100mm Long Brushless Motor. Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.

We offer this in 2 versions. See below for options.
 

Click picture for more detail.

TP Power Brushless 5670 Motor

Special while supplies last! FREE TP-cj56L Jacket (56mmx62mm long) Water Jacket with TP Motor Purchase, $20 Value!

56mm Diameter by 106mm Long Brushless Motor.

Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.

V1 Motors are a 2 piece design (see picture).
V2 motors are a three piece can design. Front and back plates screwed on.

Click picture for more detail.

TP Power Brushless 5680 V2 Motor

Special while supplies last! FREE TP-cj56L Jacket (56mmx62mm long) Water Jacket with TP Motor Purchase, $20 Value!

56mm Diameter by 116mm Long Brushless Motor.

Hand wound for high efficiency of up to 90%. Comes with high quality bearings and neodymium magnets for high power. Large vented front and rear endbells for additional heat dissipation.

We offer this in 3 versions. See below for options.

Click for more Details.

OSE Flex Cable Assembly for the ProBoat Blackjack 24 Catamaran. Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

NOTE: Propeller NOT included.

Parallel charge & balance board for Deans Ultra plugs.

Use this to balance charge up to 7 batteries at once.
Turns a single output charger into a 7 channel balancing charger to speed up charge time.

Click for instructions.
 

Multi adapter board for the popular battery taps on the market.

This adapter allows you to balance a 2S to 6S via one harness. Great adapter when you have packs with different cell counts. Eliminates the need to purchase individual harnesses for each battery manufacturer.

Plug only 1 battery in at a time during balancing.

Parallel charge & balance board for Deans Ultra plugs.

Use this to safely balance charge up to 3 batteries at once.
Turns a single output charger into a 3 channel balancing charger to speed up charge time.

Works with XH or EH style balance tap plugs.

Click for instructions.
 

Parallel charge & balance board for EC5 plugs.

Use this to safely balance charge up to 3 batteries at once.
Turns a single output charger into a 3 channel balancing charger to speed up charge time.

Works with XH or EH style balance tap plugs.

Click for instructions.
 

Parallel charge & balance board for Traxxas VXL plugs.

Use this to safely balance charge up to 3 batteries at once.
Turns a single output charger into a 3 channel balancing charger to speed up charge time.

Works with XH or EH style balance tap plugs.

Click for instructions.
 

Black solid carbon fiber plate.

This can be used to build mounting brackets or strengthen a hull.

2mm thick. These measure 95mm x 300mm +/-1mm

Click for more info. 

NEW VERSION 3

This is a must have tool for any avid rc lipo user! Dont run a low voltage Lipo Pack ever again!

This is the EOS SENTRY battery checker for LiIon, LiPo, LiFePO4, NiCd, and NiMH.

The EOS SENTRY is a quick, convenient, easy-to-use device. It shows at a glance the remaining capacity (displays both percentage and voltage) in your battery pack, cell balance, and other information you need to get the best performance and reliability from your batteries, and avoid costly mistakes.

CNC 3614350-R Reversed 3 Blade Magnalium 7075 propeller.

Machine cut to high tolerances makes this prop ready to use right out of the box. The Magnalium 7075 alloy makes this material upwards of 30% stronger than standard 7075 aluminum.

ATTENTION: Right and rotation. These spin clockwise when looking at them from the back of the boat. Used for twins or boats that require opposite rotation than normal.

Fits 1/8"(.125" 3.17mm) Smooth Bore Propeller Shafts.  

CNC 4014350 3 Blade Magnalium 7075 propeller.

Machine cut to high tolerances makes this prop ready to use right out of the box. The Magnalium 7075 alloy makes this material upwards of 30% stronger than standard 7075 aluminum.

Left hand rotation. These spin counter clockwise when looking at them from the back of the boat.

Fits 3/16"(.187" 4.76mm) Smooth Bore Propeller Shafts.
 

CNC 4014350-R Reversed 3 Blade Magnalium 7075 propeller.

Machine cut to high tolerances makes this prop ready to use right out of the box. The Magnalium 7075 alloy makes this material upwards of 30% stronger than standard 7075 aluminum.

ATTENTION: Right and rotation. These spin clockwise when looking at them from the back of the boat. Used for twins or boats that require opposite rotation than normal.

Fits 3/16"(.187" 4.76mm) Smooth Bore Propeller Shafts.
 

Traxxas Spartan Dummy Exhaust Pipes by Hot Racing

CNC aluminum construction, silver in color
Also fits other 1/10 scale RC boats

Includes:
Two Dummy Exhaust Pipes
Two 3mm Socket Head Cap Screws and Lock Nuts

Requires:
Drilling 3mm diameter hole in hull for each pipe

Specs:
Outer Diameter: 0.35" (9mm)
Length: 0.47" (11.9mm)
 

Traxxas Spartan Splash Gaurd by Hot Racing

Most of us don’t frequently drive our Spartan in reverse. When we do, water gets pushed up and into the air vents of the cover causing the boat to fill up with water. This water can cause damage to the boat’s electronic components. This splash guard for the Traxxas Spartan prevents water damage from occurring by preventing water from entering your boat.

Not only do these splash guards work great, but they add a sporty look to the back of your boat as well.

Includes splash gaurd and mounting hardware.
 

Click picture for full specs and more info.

Zipp Kits 33FE Fast Electric Outrigger Kit.

This is the Fast Electric version of our world record holding JAE 21GT nitro outrigger kit. The JAE 21 holds numerous oval and straightaway records.
Designed by IMPBA Hall Of Fame member Rod Geraghty. This hull is the current state of the art for riggers, and currently holds the record for the fastest ever 2 laps on a 1/4 mile course. Designed for very low hydrodynamic drag with water shearing and anti capillary features, this hull is fast, and turns are incredible! This version was optimized for heat racing by Martin Truex, Jr.

-This is considered a full kit, as it includes carbon boom tubes, aluminum boom tube collars, cowling and 7075 aluminum turn fin.
-This kit is highly pre-fabricated, and assembly is easy, thanks to the 33 page photo illustrated, step by step assembly manual.
-Designed for 4S operation to 6000+ mah, the 33FE will accept smaller (4500 mah) 6S setups as well.

*Picture is of a painted and finished JAE 33 Rigger. Kit comes in wooden parts that need to be assembled and painted.
 

Upgraded rudder blade for Genesis 900, Zonda or Apparition.

Wider blade design for better handling.
Extra water pickup for added cooling

Measures:
110mm from top to bottom.
35mm in width at its widest point.

Availible in silver or black anodized color. 

 

Dual pickup rudder assembly for 650mm (25")  to 900 (35") hulls.

Wide blade design for better holding while turning.
Extra water pickup for added cooling.

Measures:
110mm from top to bottom.
35mm in width at its widest point.
See picture for more details.

Available in Silver or Black anodized aluminum. 

Recommended boat sizes are general and depend on the hull type and other factors.

 

Rudder assembly with water pickup for 650mm (25")  to 900 (35") hulls.

Water pickup for added cooling.

Measures:
110mm from top to bottom.
See picture 2 and 3 for measurements.

Aluminum with silver anodize. 

Recommended boat sizes are general and depend on the hull type and other factors.

Hurricane-10 Kneeler Hydro by Classic Hydros.
Laser-cut wooden kit is 19" long without outboard attached and makes a great mini RC model. Pictures are for display only. This laser cut wooden boat kit is easy to build with no extra jigs required to assemble the laser cut pieces.

Good for use a mini electric outboard. See link below.

Includes:
Wooding hull kit.
Resin Driver figure.
Vacuum - formed Outboard cover with laser cut detail parts.
Complete step-by-step assembly instructions and drawings.

Requires:
Assembly, glues and paint. Decals not included.
Mini Outboard
2 Channel radio system
2s Lipo Pack
60 amp esc

CNC aluminum center mounting rudder.
Triangle center mount style, works well with catamarans.

Mount Measures:
22mm wide x 16mm tall

Blade measures:
Top of blade mount to the bottom of blade 90mm.
Edge of the blade itself 65mm.
Transom mount to the leading edge of the rudder blade 26mm.

CNC aluminum center mounting rudder by MBP. Designed  with a scale looking hydraulic steering linkage system for a real looking Offshore Racing style.

Triangle center mount style, works well with catamarans.

Mount Measures:
24.5mm wide x  24.5mm tall

Blade measures:
Top of blade mount to the bottom of blade 117mm.
Leading edge of the blade itself 82mm.
Transom mount to the leading edge of the rudder blade approx 18mm.

Note:
Boat not included
 

Vinyl window decal for TFL Pursuit hull.

Includes:
1 Vinyl decal. Grey window with black border.

NOTE:
Hull not included!

Black vinyl window decal for TFL Cheetah hull.

Includes:
1 Vinyl decal

NOTE:
Hull not included!
Picture 2 for display on hull only, this window is black in color(not grey).