Flex cable saver for .150 or .187 diameter cable. This can be used to stop the flex cable from coming out of your boat if the coupler comes loose.

Made of cnc cut aluminum for light weight. Less than 2 grams! Anodized in silver with a 3mm grub screw.

Measures: 12.5mm OD,  5.5mm wide.
Requires: 2.0 mm allen driver.

Install note: Install this item as close to the coupler as possible. In our picture we spaced it for display purposes only, so it was easy to see. Do not over tighten.

Note: Flex cable and coupler in picture for demonstration purpose. Not included.
 

OSE assembled .098 flex cable with 1/8" prop shaft, drive dog, bullet nut and teflon liner.

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Requires:

• 3/16 OD K&S brass tubing for stuffing tube(if being used with the Teflon liner).
• Cable cut to your desired length.

OSE assembled .098 flex cable with 1/8" prop shaft, drive dog, bullet nut and teflon liner. IMPORTANT:

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Requires:

• 3/16 OD K&S brass tubing for stuffing tube (if being used with the Teflon liner).
• Cable cut to your desired length.

Click picture for full details.

OSE assembled .130 flex cable with prop shaft that is a stepdown 3/16" to 1/8" for 1/8" propellers.

The propeller shaft works with 3/16" struts. This option is good for a high powered small boats that need the strength of larger cable and prop shafts.

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Click picture for full details.

OSE assembled .130 right lay flex cable with prop shaft that is a stepdown 3/16" to 1/8" for 1/8" propellers.

The propeller shaft works with 3/16" struts. This option is good for a high powered small boats that need the strength of larger cable and prop shafts.

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

OSE assembled .130 flex cable with 3/16" prop shaft, drive dog, basic nut and teflon liner. Flex Cable is approx 20" Long.

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Requires:
7/32 OD K&S brass tubing for stuffing tube when used with the Teflon liner.

• Cable cut to your desired length.

OSE assembled .130 flex cable with 3/16" prop shaft, drive dog, basic nut and teflon liner.

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Requires:

• 7/32 OD K&S brass tubing for stuffing tube when used with the Teflon liner.
• Cable cut to your desired length.

OSE assembled .150" flex cable with Octura 3/16" stepped down to 1/8" Shaft for 1/8" propellers.

The shaft is made for 3/16"(.187') struts.
The propeller shaft measures 2 1/4" long(approx 57mm)
Measures approximately 24"(approx. 610mm) from tip to tip.*

The Includes:
Octura oct-oc61504ps Shaft
Octura oct-oc4d brass drive dog.
Octura oct-oc4pn Bullet Prop Nut
.150 Teflon Liner.

Requires:

• 1/4 OD K&S brass tubing for stuffing tube when used with the Teflon liner.
• Cable cut to your desired length.

OSE assembled .150" Right flex cable with Octura 3/16" stepped down to 1/8" Shaft for 1/8" propellers.

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

The shaft is made for 3/16"(.187') struts.
The propeller shaft measures 2 1/4" long(approx 57mm)
Measures approximately 24"(approx. 610mm) from tip to tip.*

The Includes:
Octura oct-oc61504ps Shaft
Octura oct-oc4d brass drive dog.
Octura oct-oc4pn Bullet Prop Nut
.150 Teflon Liner.

Requires:

• 1/4 OD K&S brass tubing for stuffing tube when used with the Teflon liner.
• Cable cut to your desired length.

OSE assembled .150 flex cable.

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Includes:
(1) .150 Flex Cable
(1) Propeller shaft, 3/16" (4.75mm) diameter, 2.25" (57mm) Long, pn# oct-oc6150ps
(1) Drive Dog pn# oc6dmm
(1) Prop Nut: pn# ose-8135
(1) Cable system approx 20" long
(1) .150 Teflon Tubing: pn# oct-150T-24

Requires:
7/32 OD K&S brass tubing pn# 8130 for stuffing tube when used with the NO Teflon liner.
1/4 OD K&S brass tubing pn# 8131 for stuffing tube when used with the Teflon liner.
Cable cut to your desired length.

OSE assembled Octura .150 Right lay flex cable with 3/16" prop shaft, drive dog, basic nut and teflon liner. Flex Cable is approx 22" Long.

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Includes:
(1) Propeller Shaft oct-oc6150ps 2 1/4" (57mm)
(1) Drive Dog pn# oc6dmm
(1) Thin Prop Nut: pn# oct-n1032
(1) .150 Right lay Flex Cable approx 22" long
(1) .150 Teflon Tubing approx 22" Long : pn# oct-150T-24

Requires:
7/32 OD K&S brass tubing pn# 8130 for stuffing tube when used with the NO Teflon liner.
1/4 OD K&S brass tubing pn# 8131 for stuffing tube when used with the included Teflon liner.
Solder or glue the flex cable into the propeller shaft.
Set the drive dog and cut the flex to your desired length.

OSE assembled .150 flex cable with extra long 2.75" (70mm) long 3/16" prop shaft, drive dog, basic nut and teflon liner. Flex Cable is approx 22" Long.

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Includes:
(1) .150 Flex Cable
(1) Propeller shaft, 3/16" (4.75mm) diameter, 2.75" (70mm) Long, pn# OSE-ose-1381
(1) Drive Dog pn# oc6dmm
(1) Prop Nut: pn# ose-8135
(1) Cable system approx 20" long
(1) .150 Teflon Tubing: pn# oct-150T-24

Requires:
7/32 OD K&S brass tubing pn# 8130 for stuffing tube when used with the NO Teflon liner.
1/4 OD K&S brass tubing pn# 8131 for stuffing tube when used with the Teflon liner.
Cable cut to your desired length.

OSE assembled .150 Right lay flex cable with extra long 2.75" (70mm) long 3/16" prop shaft, drive dog, basic nut and teflon liner. Flex Cable is approx 22" Long.

The cable in this package is made for propellers that spin clockwise. For example, Octura props that end in the letter "R" or Graupner props that end in the letter "L".

Our assembled systems use the latest in assembly technology. We don't heat the cable in our process. This helps solve the breaking problems at the solder joint that other companies have.

Includes:
(1) .150 Right lay Flex Cable
(1) Propeller shaft, 3/16" (4.75mm) diameter, 2.75" (70mm) Long, pn# OSE-ose-1381
(1) Drive Dog pn# oc6dmm
(1) Prop Nut: pn# ose-8135
(1) Cable system approx 20" long
(1) .150 Teflon Tubing: pn# oct-150T-24

Requires:
7/32 OD K&S brass tubing pn# 8130 for stuffing tube when used with the NO Teflon liner.
1/4 OD K&S brass tubing pn# 8131 for stuffing tube when used with the Teflon liner.
Cable cut to your desired length.

OSE .130" flex cable with 4mm to 1/8" (3.17mm) Propeller Shaft for 1/8" props.

Comes with teflon tubing.
Measures at least 12" (300mm) or more from tip to tip.

Requires:
Customer to cut the flex cable to their required length.
7/32 K&S brass stuffing tube.

OSE Reversed .130" flex cable with 4mm to 1/8" (3.17mm) Propeller Shaft for 1/8" props.

The cable in this package is made for propellers that spin clockwise.
For example, Octura props that end in the letter "R" like the octura X430R.

Comes with teflon tubing.
Measures at least 12" (300mm) or more from tip to tip.

Requires:
Customer to cut the flex cable to their required length.
7/32 K&S brass stuffing tube.

OSE .130" flex cable with 4mm Propeller Shaft for 4mm props.

Comes with teflon tubing.
Measures at least 18" (300mm) or more from tip to tip.

Requires:
Customer to cut the flex cable to their required length. Set drive dog in desired location.
7/32 K&S brass stuffing tube.

OSE Reversed .130" flex cable with 4mm Propeller Shaft for 4mm props.

The cable in this package is made for propellers that spin clockwise.
For example, Octura props that end in the letter "R" like the octura X442R or Graupner props that end in the letter "L" like the grauper 2317.40L.

Comes with teflon tubing.
Measures at least 18" (300mm) or more from tip to tip.

Requires:
Customer to cut the flex cable to their required length. Set drive dog in desired location.
7/32 K&S brass stuffing tube.

3/16"(.187) Cable with 3/16" propeller shaft.

From end to end the entire unit measures 11.5". The Prop shaft is 3.75" long.

This is the upgrade replacement part for the ProBoat Shockave 36 & ProBoat Thunder Cat but can but used with other boats.

Required:
Drive Dog, We suggest oct-oc6dm for the Shockwave and Thundercat.
5mm prop nut pn# mc-94205A230
 

OSE assembled 3/16" (.187) Flex cable with 3/16" (.187" 4.75mm) diameter propeller shaft.

For use with 3/16" propellers and struts with 3/16" (.187) bushings or bearings.

We offer these in
18", 24" or 30" total assembled length.

NOTE: Flex cable lengths are from tip of shaft to end of cable. Example, 24" cable is aprox 21" of cable and 3.125" of prop shaft. Lengths are approximate and can be plus or minus one half inch. These require the customer to cut these to their required length.

Includes:
.187" (4.74mm) diameter flex cable.
.187" (4.74mm) propeller shaft 3.125" (80mm) Long

Requires:
3/16" Drive Dog
10/32 Nut.
Teflon Tubing .187 Size

OSE assembled .187 Reversed cable with 3/16" shaft for use with 3/16" Propellers and 3/16" (.187") struts. 

NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props.

We offer these in three sizes.
18", 24" or 30" total assembled length.

NOTE: Flex cable lengths are are from tip of shaft to end of cable. Example, 18" cable is aprox 18" of cable and 3.125" of prop shaft. Lengths are approximate and can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.

Includes:
.187" (4.74mm) diameter flex cable.
.187" (4.74mm) propeller shaft 3.125" (80mm) Long

Requires:
3/16" Drive Dog
10/32 Nut
Teflon Tubing .187 Size

OSE assembled 3/16" (.187) Flex cable with 3/16" (.187" 4.75mm) diameter propeller shaft.
For use with 3/16" propellers and struts with 3/16" (.187) bushings or bearings.

This is the same as our popular OSE-1190 assembled cable, except the propeller shaft is shorter by .37" (9.4mm). Using this cable will allow more strut adjustability when used with the shorter struts on the market.

We offer these in three sizes.
18", 24" or 30" total assembled length.

NOTE: Flex cable lengths are from tip of shaft to end of cable. Example, 18" cable is aprox 15" of cable and 2.75" of prop shaft. Lengths are approximate and can be plus or minus one half inch. These require the customer to cut these to their required length.

Includes:
(1) .187" (4.74mm) diameter flex cable.
(1) .187" (4.74mm) propeller shaft 2.75" (70mm) Long

Requires:
3/16" Drive Dog
10/32 Nut.
Teflon Tubing .187 Size

OSE assembled .187 Reversed cable with 3/16" shaft for use with 3/16" Propellers and 3/16" (.187") struts. 

NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props.

We offer these in three sizes.
18", 24" or 30" total assembled length.

NOTE: Flex cable lengths are are from tip of shaft to end of cable. Example, 18" cable is aprox 18" of cable and 2.75" of prop shaft. Lengths are approximate and can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.

Includes:
.187" (4.74mm) diameter flex cable.
.187" (4.74mm) propeller shaft 2.75"(70mm) Long

Requires:
3/16" Drive Dog
10/32 Nut
Teflon Tubing .187 Size

OSE assembled 3/16" (.187") Cable with 3/16" prop shaft.

The cable assembly is approximately 18" from end to end. The flex cable is soldered directly to the propeller shaft. Drive dog slot is machined for a perfect flat spot to attach the drive dog to.

Includes:
(1) 3/16" (.187") (4.75mm) .187 Flex cable assembled to 3/16" (.187") (4.75) diameter propeller shaft 2.75" (70mm) long.
(1) Drive Dog pn# oc6dmm
(1) Brass Bullet nut pn# oc6pnmm
(1) Thin Nut pn# oct-n1032

Requires:
1/4 OD K&S part# 8131 brass tubing for stuffing tube when used with the NO Teflon liner.
9/32 OD K&S part# 8132 brass tubing for stuffing tube when used with the Teflon liner pn# oct-oc187T-24.
Customer to cut to their desired length.

OSE assembled 3/16" (.187") Reversed Cable with 3/16" prop shaft.

NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props.

The cable assembly is approximately 18" from end to end. The flex cable is soldered directly to the propeller shaft. Drive dog slot is machined for a perfect flat spot to attach the drive dog to.

Includes:
(1) 3/16" (.187") (4.75mm) .187 Reversed Flex cable assembled to 3/16" (.187") (4.75) diameter propeller shaft 2.75" (70mm) long.
(1) Drive Dog pn# oc6dmm
(1) Brass Bullet nut pn# oc6pnmm
(1) Thin Nut pn# oct-n1032

Requires:
1/4 OD K&S part# 8131 brass tubing for stuffing tube when used with the NO Teflon liner.
9/32 OD K&S part# 8132 brass tubing for stuffing tube when used with the Teflon liner pn# oct-oc187T-24.
Customer to cut to their desired length.

OSE assembled .250 (1/4") cable to 1/4" propeller shaft w/stepped down shaft end for 3/16"(.187) Propellers. This item can be used with the 1/4 struts but has the ability to use the smaller 3/16" props for better tuning.

This shaft can be used with 3/16" drive dog style props.
To use this with 1/4" drive dog style props, please purchase Octura part# oct-oc68rb.

18", 24", 30" or 36" total assembled length.

Requires:
3/16" Drive Dog
10/32 threaded nut.
Teflon tubing 1/4" size

Note:
The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft. Flex cable lengths are approximate. They can be plus or minus one half inch.  These assemblies require the customer to cut the cable to their required length.

OSE assembled Zelos 48 Cable.

.250 (1/4") cable to 1/4" propeller shaft w/stepped down shaft end for 3/16"(.187) Propellers.

 

OSE 1/4" Assembled, reverse cable with 1/4 to 3/16 step down shaft.

18", 24", 30" or 36" total assembled length. These can be used with 1/4"(.250") struts.

NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props.

Requires:
3/16" Drive Dog
10/32 threaded nut.
Teflon tubing 1/4" size

Note:
The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft.
Flex cable lengths are approximate. They can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.

OSE assembled .250 (1/4") cable with 1/4 Propeller shafts. These can be used with 1/4"(.250") struts.

Specs:
Flex Cable diameter: 1/4 (.250", 6.35mm)
Propeller Shaft length: 4.25" (108mm)
Propeller shaft diameter: 1/4" (.250", 6.35mm)
Assembled length: 18", 24", 30" or 36" 

Requires:
1/4" Drive Dog
1/4 threaded nut.
Teflon tubing 1/4" size

Note:
The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft. Flex cable lengths are approximate. They can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.

OSE assembled .250(1/4") Reversed cable with 1/4 Propeller shafts. These can be used with 1/4"(.250") struts.

NOTE: This is REVERSED CABLE. The cable in this package is made for propellers that spin clockwise, like the Octura "R" series right props or the Graupner left props.

Specs:
Flex Cable diameter: 1/4 (.250", 6.35mm)
Propeller Shaft length: 4.25" (108mm)
Propeller shaft diameter: 1/4" (.250", 6.35mm)
Assembled length: 18", 24", 30" or 36"

Requires:
1/4" Drive Dog
1/4 threaded nut.
Teflon tubing 1/4" size

Note:
The OSE listed length is the total assembled length. Measured from end of cable to the tip of the propeller shaft.
Flex cable lengths are approximate. They can be plus or minus one half inch. These assemblies require the customer to cut the cable to their required length.

Upgraded .150" Cable with 3/16" prop shaft.

This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

This can also be used in any other boat requiring a .150 cable that measures 12.75" (325mm) (+/- .1") from tip to tip. No soldering or cutting required!

Includes: Teflon Liner, cable with prop shaft and attached drive dog.

OSE cable for the ProBoat Blackjack 29 v1. The version that comes stock with the 1800kv motors.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 12.75" (325mm) (+/- .1") from tip to tip.

We suggest using part number oct-ocfhe5mm15S coupler with this shaft and the ProBoat Blackjack 29.

OSE cable for the ProBoat Mystic, Miss Geico (Version 1) Catamaran.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 12 13/16" from tip to tip.

We suggest using part number oct-ocfhe5mm15S coupler with this shaft and the ProBoat mystic Catamaran.

OSE cable for the ProBoat BlackJack 29 V3 (ProBoat part number PRB08011) or Geico 29 V3 (ProBoat part number PRB08009). The version that comes stock with the 2000kv motors.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 12.00" (305mm) (+/- .1") from tip to tip.

We suggest using part number oct-ocfhe5mm15D coupler with this shaft and the ProBoat Miss Geico 29 V3 or BlackJack 29 V3.

OSE Flex Cable Assembly for the AquaCraft UL-1. Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 13 11/16" from tip to tip.

Includes: Teflon Liner, .150 cable with 3/16" prop shaft and attached drive dog and brass bullet nut.

Picture shows the stock and Upgraded OSE cable side by side.

Click for more Details.

OSE Flex Cable Assembly for the ProBoat Blackjack 24 Catamaran. Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

NOTE: Propeller NOT included.

Click for more Details.

OSE Flex Cable Assembly for the AquaCraft Revolt Mono. Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

NOTE: Propeller NOT included.

OSE Flex Cable Assembly for the ProBoat Impulse 31.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures approx 8 3/8" (212.7mm) from tip to tip.

OSE heavy duty flex cable assembly for ProBoat Geico V3 & BlackJack V3.

This is for customers with a heavily modified Geico V3 or BlackJack V3 that are using 4074 and 4082 motors. This cable is made with thicker gauge .187" Cable assembled to a 3/16"(.187) prop shaft and bullet nut. The cable we use is over 20% thicker than the stock ProBoat cable.

This is cut and ready to install in your boat (requires ose-81518).

No soldering or cutting required!

NOTE: This will NOT fit a Stock Geico V3 or BlackJack V3 boat without the following additions.
Requires: ose-81518 5mm to .187 Coupler and removal of stock proboat Teflon liner.

OSE heavy duty flex cable assembly for ProBoat Impulse V3.

This is for customers with a heavily modified ProBoat Impulse V3 boats that are using 4074 and 4082 motors. This cable is made with thicker gauge .187" Cable assembled to a 3/16"(.187) prop shaft and bullet nut. The cable we use is over 20% thicker than the stock ProBoat cable.

This is cut and ready to install in your boat (requires ose-81518).

No soldering or cutting required!

NOTE: This will NOT fit a Stock Impulse V3 without the following additions.
Requires: ose-81518 5mm to .187 Coupler and removal of stock proboat Teflon liner.

OSE Impulse 31 heavy duty flex cable assembly.

This is for customers with a heavily modified ProBoat Impulse 31 boats that are using 4074 and 4082 motors. This cable is made with thicker gauge .187" Cable assembled to a 3/16"(.187) prop shaft and bullet nut. The cable we use is over 20% thicker than the stock ProBoat cable.

This is cut and ready to install in your boat (requires ose-81518).

No soldering or cutting required!

NOTE: This will NOT fit a Stock Impulse without the following additions.
Requires: ose-81518 5mm to .187 Coupler and removal of stock proboat Teflon liner.

This can also be used in any other boat requiring a .187 cable that measures approx 8 3/8" (212mm) from tip to tip.

OSE ProBoat UL-19 heavy duty flex cable assembly.

This is for customers using 6s Lipo power or a modified ProBoat Ul-19 boat. This cable is made with thicker gauge .187" Cable assembled to a 3/16"(.187) prop shaft and bullet nut. The cable we use is over 20% thicker than the stock ProBoat cable.

This is cut and ready to install in your boat (requires ose-81518).

No soldering or cutting required!

NOTE: This will NOT fit a Stock Ul-19 without the following additions.
Requires: ose-81518 5mm to .187 Coupler and removal of stock proboat Teflon liner.

This can also be used in any other boat requiring a .187 cable that measures approx .

OSE Flex Cable Assembly for the ProBoat Impulse 31 V3.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2.25" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

Benefits over stock cable:
Thicker gauge flex cable windings.
Soldered end for both added grip within the coupler and help with unwinding of cable end.
2.25" (57mm) Prop shaft for reduced drag.

This can also be used in any other boat requiring a .150 cable that measures approx 215mm (+/-2mm) from tip to tip.

Includes: Teflon Liner, .150 cable with 3/16" prop shaft and attached drive dog and streamlined bullet nut.

OSE Flex Cable Assembly for the AquaCraft Super Vee 27, SuperVee 27R and Super Vee Nitro boats.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

This can also be used in any other boat requiring a .150 cable that measures 12" from tip to tip.

No soldering or cutting required!

Includes: Teflon Liner, cable with prop shaft and attached drive dog and brass bullet nut.

ProBoat Zelos 36 Twin Flex cable assembly.

OSE .187" Cable with 3/16" prop shaft. This cable measures .187" (4.75) in diameter. The wire strands on this cable are a thicker gauge for added strength. We also increased the prop shaft area for larger props.

No soldering or cutting required.
These can be purchased as a set of left and right rotation or in a single cables if a replacement is needed.

Specs:
Octura oc6dmm drive dog
Octura oc6pnmm Brass Bullet prop nut
OSE-1190 Cable Left or Right

Measures:
10.12" (257mm) from end to end
 

TFL Zonda 1 Piece Flex cable assembly.

OSE .187" Cable with 3/16" prop shaft. This cable measures .187" (4.75) in diameter. The flex cable on these is a thicker gauge for added strength. Installing these cables will make greasing the cables much easier than the stock cables.

No soldering or cutting required.
These can be purchased as a set of left and right rotation or in a single left or right rotation.

NOTE: We can only guarantee this cable works with the TFL Zonda ose-80250-1133 .
 

OSE Heavy Duty Flex Cable for the Traxxas Spartan.
NOTE: This will NOT work with a Stock Spartan!

OSE .187" Cable with 3/16" prop shaft. This cable measures .187" (4.75) in diameter. The stock cable measures .150" (3.81mm) in diameter. The stock cable will easily break when used on 6s or in a boat that has upgraded the motor for more power. This cable is cut and ready to install in ONLY a Traxxas Spartan that has already upgraded to accept a 3/16" (4.75mm) propeller shaft. 
This requires purchase of the OSE Spartan Strut upgrade (part # ose-1405.

No soldering or cutting required!

This can also be used in any other boat requiring a .187 cable that measures approx. " (mm) from tip to tip.

NOTE: We can only guarantee this cable works with the OSE Spartan Strut, part# OSE-1405.

OSE Heavy Duty Flex Cable for the ProBoat Voracity

OSE .187" Cable with 3/16" prop shaft. This cable measures .187" (4.75) in diameter. This cable is cut and ready to install into a stock ProBoat Voracity 36 with no other modifications. Comes as pictured with bullet nut.

Benefits over stock cable:
Thicker gauge flex cable windings.
5mm longer flex cable for added grip within the stock coupler.
Soldered end for both added grip within the coupler and help with unwinding of cable end.

No soldering or cutting required!

This can also be used in any other boat requiring a .187 cable that measures approx. 240mm(+/-2) from tip to tip.

OSE Flex Cable Assembly for the AquaCraft Motley Crew. Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 14 11/16" from tip to tip.

OSE Flex Cable Assembly for the AquaCraft Lucas Oil Catamaran.

Upgraded .150" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. The prop shaft is only 2 1/4" long which reduces resistance and allows more strut adjustment. Which will help vibrations which will help reduce strut bearing wear. Just install it and go!

No soldering or cutting required!

This can also be used in any other boat requiring a .150 cable that measures 14 3/4" from tip to tip.

OSE Flex Cable Assembly for the OSE Pursuit Mono. This fits the TFL Pursuit that comes stock with stinger drive. See picture 2

Upgraded .187" Cable with 3/16" prop shaft. This is cut and ready to install in your boat. This upgraded cable is a higher quality with thicker wire strands and better aligned to the prop shaft then the stock unit. This replaces the stock two piece cable with a single piece cable. Because of this, the cable can be removed without having to totally remove the strut or motor. Which makes greasing the cable, MUCH easier.

No soldering or cutting required!

This can also be used in any other boat requiring a .187 cable that measures approx. 10.31" (262mm) from tip to tip.

NOTE: Because of the many variations of this boat on the market we can only guarantee this cable fits into the hull sold by OffshoreElectrics. Some TFL Pursuits come with .150 cable, if this is the case and you are upgrading to the .187 OSE cable, this will not work  without the following additions, OSE-81518 5mm to .187 Coupler. Check your cable for size before purchase.

Cable for Delta Force Mini Sniper.

.125 Flex Cable assembled to a 4mm prop shaft.

Includes everything in the picture, including the drive dog and bullet nut.

Measures 160mm long from end of flex cable to the start of the drive dog.

Flex cable & teflon liner for the OS Max 21-XM Marine engine.
This is the assembly that connects the engine to the outboard propeller.

FEATURES: Steel construction Flexible wire

INCLUDES: One flex shaft One shaft tube

REQUIRES: Installation onto engine.

SPECS:
Length of flex shaft: 130mm (5.12")
Diameter of flex shaft: 4mm (0.16")
Length of shaft tube: 100mm (3.94")