The beauty of this antenna tube is the clean looks and ease of installation.

Just drill one simple 1/4" hole, tighten the included hex nut and your done!

The tube measures 12-13"

This aluminum bracket mount will allow you to mount your Bru Line or similar antenna on the transom of your boat.
 
The picture shows the mount with a BruLine antenna attached to it on the left and just the mount on the right. This part doesn't come with the antenna!

The Raider 25 Deep Vee Race  Boat is exclusively built for OffshoreElectrics by the guys at Aeromarine. Aeromarine is building these using their system of light weight fiberglass with a carbon fiber floor in the motor mounting area for added strength. We stock these in white, but we can special order yellow or blue by request.

Speeds up to 45mph

Click for Video

*Measures 24.5 x 6.75"
Decals not included.

Titan 29 is a Deep Vee  hull that is built light with Fiberglass and carbon fiber floor for added strength.
It can be powered from 12 cells all the way up to 18 NiMH Cells.
Up to 4s Lipo 

Speeds up to 45mph

*Measures 29" x 10.5"

Recommended hardware:
Speedmaster 3/16 Stinger Strut.
Speedmaster 21 Mono Rudder.
Medium Size Turn Fins.
.150 or .187 Flex Cable, which one depends on power. Email us for help with your setup.

The Challenger Deep Vee Mono hull that is built light with Fiberglass and carbon fiber floor for added strength. 

This is a special order item. It takes 1-2 weeks to recieve it.

It can be powered by

12 to 18 NiMH cells or
4s or 6s Lipo 

Speeds up to 50 mph
*Measures 31" x 9.50"

White Titan 33 with damaged bow tip.

Second picture shows that is item has a DAMAGED bow tip. Normally these sell for $169. Buy this one for $95.

is a Deep Vee  hull that is built light with Fiberglass and carbon fiber floor for added strength. This particular hull is one of the top performers in Namba's P or Q Mono and Offshore Race Classes.

It can be powered from 12 cells all the way up to 24 NiMH cells. 
Or
4s to 6s Lipo Power

Speeds up to 55 mph
 
*Measures 33.25" x 10.5"

This is a WHITE Mean Machine 2 with damaged sponson tip.

Second picture shows that is item has a DAMAGED sponson tip. Normally these sell for $155. Buy this one for $100. Its an easy fix with some paint and epoxy.

Same fast hull design as the Mean Machine, but with the newly updated racing insipred cowl. This fiberglass hull is a lightweight with an inlaid Carbon Fiber tunnel section for added strength and rigidity.

It can be powered with either 4s to 6s Lipo

Speeds up to 70mph

*Measures 29.5" x 11"

Titan 33 is a Deep Vee  hull that is built light with Fiberglass and carbon fiber floor for added strength. This particular hull is one of the top performers in Namba's P or Q Mono and Offshore Race Classes.

It can be powered from 12 cells all the way up to 24 NiMH cells. 
Or
4s to 6s Lipo Power

Speeds up to 55 mph
 
*Measures 33.25" x 10.5"

Aeromarine collet style coupler.

This made in the USA is a top quality coupler that will grip cable tighter than another else on the market. The brass insert is replaceable and can be changed for other sizes if needed.

Options Available:
5mm smooth hole motor side to .150 flex cable.
5mm smooth hole motor side to .187 flex cable.
6mm smooth hole motor side to .150 flex cable.
6mm smooth hole motor side to .187 flex cable.
8mm smooth hole motor side to .187 flex cable.

Specs:
Weight: 1 ounce. Length: Approx 32.5mm(1.30") long x 16mm (.63") wide.

This is the AeroMarine Avenger 36.

It can be powered with either 6s to 8s Lipo

SPECS:
Measures 35.5 x 14.5" (900mm x 370mm)
Weighs 5lb 12oz (92 ounces)

Any questions please email us for help and info.

Aeromarine replacement brass collet insert.

This item DOES NOT come with the collet itself. THIS is ONLY the Replacement brass insert.

See product options for sizes.
NOTE: Only 5mm and 6mm inserts are interchangeable. 8mm brass inserts are not interchangeable with other size couplers.

This fiberglass hull is a lightweight version of the "Mean Machine" Cat a inlaid  Carbon Fiber tunnel section for added strength.

It can be powered with either 4s to 6s Lipo

Speeds up to 70mph

*Measures 29.5" x 11"

Click picture for more details.

This is the Mean Machine 2. Same fast hull design as the Mean Machine, but with the newly updated racing insipred cowl. This fiberglass hull is a lightweight with an inlaid Carbon Fiber tunnel section for added strength and rigidity.

It can be powered with either 4s to 6s Lipo

Speeds up to 70mph

*Measures 29.5" x 11"

Aeromarine Sprint Cat 40 with Turbine Hatch.

Comes in Electric layup with 5" Rails or Electric layup with carbon fiber reinforced tunnel floor with NO stringers.

36" Length, 14" Wide
Weights Approx 4 pounds 8 ounces.

Aluminum large out water outlet.

Works well with 1/4 OSE water tubing. 

Aluminum small bore water outlet.

Approx 20mm long

Works well with OSE 7/32" sized tubing.
Replaces the long out of stock aero-2010

This aluminum servo mount can either be mounted in your boat, standing up on laying down. Its made for standard size servos.

Aluminum bulkhead fitting for large size silicon tubing.

Aeromarine Aluminum cowl locks.

The Original design positive way to hold down your hatches. Don't be fooled...and Lose your hatch..to some cheap imitation made with inferior aluminum. Go with the innovator in RC boating.. Go with Aeromarine!  (the old style push button has been discontinued by the manufacturer, this has been developed by Aeromarine as a replacement and has the same diameters as the older push button style).

(2) per package.

Click for Full Details.

Genesis Catamaran Conversion Strut.

This is used to convert your stock 4mm Genesis Catamaran strut to a 3/16" Strut.
This uses (1) octura 3/16" lead Teflon bushing part number oct-oc6ltsb

Includes:
3/16" Aluminum Strut with lead Teflon bushing.

Comes with no brackets, requires the stock inline brackets and screws from the stock Genesis Cat.

Aeromarine scale style adjustable trim tabs.

Specs:
1.50" (38mm) wide by 1.75" (45mm) long

Aeromarine scale style adjustable trim tabs.

Specs:
2.00" (50mm) wide by 2.30" (58mm) Long

This is the modern looking cowl/hatch upgrade for the AeroMarine Mean Machine. It fits better than the stock hatch and tapes down 10 times easier.

Made in the USA by AeroMarine, so the color will be very close to the color of your hull. But we can not guarantee an exact match, due to fading and age differences of the gelcoat.

Includes: Hatch ONLY.

Requires:
Fitting the hatch to your hull.

NOTICE FOR ORDERS OUTSIDE THE USA! This item can NOT be shipped by Priority Shipping. It can only be shipped by Expressmail! Any order that contains this item and does not select shipping by Expressmail, will have this item removed, refunded and the other items shipped without notice.