This is the Hyperformance Bullet Drive Outboard motor leg.
If you are looking for all out speed or racing, this is the outboard for you. Designed to handle the power of a 36mm diameter brushless sized motor. The Hyperformance 3.5, 7.5 & 11 Bullet Drives utilize a stainless tube for the cable guide. It is cast into the lower drive and does not require a teflon liner. The design reduces the drag on the cable vs. other available lower drives on the market.
Comes with the following.
(1) pn#350bd Lower Unit
(1) pn#psa35 3/16" Prop shaft and bushing assembly for 3/16" props.
(1) pn#dc1563s2 Flex Cable
(1) pn# obmm35 mount with both height and angle adjustment.
(1) Pn#eobck35-5mm which includes the a 5mm coupler for a brushless motor that has a 5mm shaft and brushless motor mounting plate for brushless motors that have a 25mm screw hole spacing. Motor mounting screws, 3mm.
Requires: Brushless motor with 540 mounting bolt pattern (25mm spacing).
Which motor will depend on your application. Email us for help with your specific project.
NOTE: 52mm maximum propeller diameter.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.