SEAL Series 300 amp 14s Lipo brushless esc.
Waterproof design (rates as IP 67) allows this ESC to work in wet conditions.
Continuous Current (A): 300 Amps
Burst Current(A): 350 Amps
Voltage: 18-42 NiH : 6s - 14s Lipo
Power Wire: 8＃AWG，160mm-Red/160mm-Black
Motor Wire 8＃AWG，160mm-Black
BEC output: None requires rx pack.
Optional programing with LCD programming card.
Case dimensions (not including wires):
Includes: Everything in picture number one
Requires: Connectors, 8mm bullet connectors or larger.
Note: This esc will require optional receiver battery pack or optional external BEC circuit. This esc was designed to work in an environment where its possible for the esc to get wet on occasion. Not for use underwater. OSE does not suggest using this item under water!!
This esc is suggested for boats the 40" (1000mm) plus range. Because there are so many variables with each hull and installation its impossible to specify all the applications for this esc. If you have any questions on using this esc with your particular boat, please contact us before purchase.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.