SEAL Series 500 amp 6s-14s Lipo brushless esc.
Specs: Epoxy coated for use in wet conditions. Continuous Current (A): 500 Amps Burst Current (A): 2000 Amps Voltage: 18-42 NiH : 6s - 14s Lipo Power Wire: High flow 6 Gauge wireMotor Wire: Direct plug in with 10mm male connectors. BEC output: None, requires receiver pack or optional bec circuit. Optional programing with LCD programming card. Dimensions (not including wires): See picture 4 Length: 185mm Width: 105mm Height: 28mm Weight: 950g Water fitting thread size: 6.3mm od, 3.80mm id Includes: Everything in picture number one & three 10mm male connectors for your motor. Requires: Connectors for your batteries, 10mm bullet connectors or larger.Works with mo-color-tub or ose-tubing-9/32-clear Note: This esc will require optional receiver battery pack or optional external BEC circuit. This esc was designed to work in an environment where its possible for the esc to get wet on occasion. Not for use underwater. OSE does not suggest using this item under water!! This esc is suggested for boats the 60" (1500mm) plus range. Because there are so many variables with each hull and installation its impossible to specify all the applications for this esc. If you have any questions on using this esc with your particular boat, please contact us before purchase.
These products are recommended with items in your cart.
Not logged in
Help & FAQ
© Copyright 2019 - Offshore Electrics
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.